Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 11, 2019
My washer starts filling, but the water drains out. If i unplug it it fills properly. It will work fine for a couple of loads, then you have to unplug it again. Is the drain pump sticking open?
For model number gud277essj0ww
Hello Chris, thank you for your question. We would recommend testing/replacing the water inlet valve, drain pump and the water level pressure switch. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenn
October 10, 2022
Drain pump does not engage or pump the tub empty. The pump spins freely and the magnet on the rotor can be felt to be working through the plastic housing. Is the outer electromagnet known to fail? I cleaned the rust off of it and reinstalled yet it still does not work.
For model number GTYW460BMMWW
Hello Glenn, thank you for your question. According to our research on the model, the Drain Pump appears to be faulty and you may need to replace it. We hope this information is useful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.