![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Water Inlet Valve Specifications
Note: This valve has been updated by the manufacturer and no longer includes the removable pre-filter bracket connector. It must be ordered separately; part number WPW10445062.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Refrigerator Water Inlet Valve
![Replacing your Whirlpool Refrigerator Water Inlet Valve Replacing your Whirlpool Refrigerator Water Inlet Valve](https://img.youtube.com/vi/eNGe_VUDIBA/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# W10408179 replaces these:
AP5263471, 1938614, W10408179, 2186486, 2188622, 2188708, 2188746, 2205762, 2255457, 2304757, 2304833, 2315534, 4389177, W10408179VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Heather D - February 10, 2024
Verified Purchase
Making ice, no leaks
The valve received was easy to install, fit perfectly, and works with no more leaking into the ice bin. The drips that were sticking all the cubes together in a solid block have ceased and we are back to using the ice maker.
Marc V - February 7, 2024
Verified Purchase
Worked like a charm
Simple and easy to install. Well worth getting the right part. Only took me about half an hour to swap the valves and that we me just clucking around.
Brad G - August 17, 2023
Verified Purchase
Easy repair
The part was in great condition very quick shipping now the ice maker is back working condition FANTASTIC
Jason O - August 16, 2023
Verified Purchase
Water inlet valve replacement, 18 year old kitchen aid refrigerator
Excellent service , correct part arrived quickly and installed easily. Support videos were helpful. Telephone customer support was excellent.
Carla M - March 5, 2023
Verified Purchase
Easy, fast repair
We were pretty intimidated to try this repair. However your little video was so helpful we completed the repair and were pretty happy with ourselves.
Bill B - February 24, 2023
Verified Purchase
Easy repair if the part wouldn't have been defective
The part came quick after ordering, but when we watched the instruction video and followed it correctly and replaced the part, the valve failed, it was leaking from one of the tubing connections, took it off again and cut the tubing straight again. Turned water back on and leaked again in the same connection. Shut water off to fridge and now just get water from tap.
![PartSelect logo](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/originals/psca-house.png)
February 25, 2023
Hi Bill,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
CHERRILL B - December 28, 2022
Verified Purchase
Great repair!
The repair worked as expected!
Bill D - September 29, 2022
Verified Purchase
Easy to change out
Came with everything needed
Charlie M - September 10, 2021
Verified Purchase
Problem solver
I was expecting the repair parts to arrive as quoted "five days" instead it showed up in two. It installed in record time and worked so much better than the refrigerator did in years. Thanks Charlie
Dariusz I - April 22, 2021
Verified Purchase
Great part fast delivery
Part fits in my 21 year old Whirlpool refrigerator. Easy fix.Fast delivery
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 72 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
was not making ice
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker.
Other Parts Used:
-
GLENN from ORLAND PARK, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
696 of 775 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the remote water was turned on, water was pouring onto floor from rear of refrigerator
First I unplugged the fridge, then using the socket set I removed the cardboard shield from the lower rear of the refrigerator. I located the leaking water from a cracked solenoid water valve just inside the lower cavity directly behind the water intake line. Removing the valve was a snap - most of the valve plastic compression couplings unscrewed and came off. The metal compression fittings required an adjustable wrench and a pair of pliers to hold the solenoid unit steady. A couple of hex nuts kept the solenoid bolted to the refrigerator frame and came off easily with the socket. Two simple push-on electrical plugs came right off just by pulling on them. The new valve unit wasn't exactly like the original one. It had push-on instead of compression water fittings and the plugs were oriented differently. I recommend studying which water lines entered which port on the valve because I was a little unsure after I took the old one apart (whoops). After figuring out how to put it pack together, the push-on water fittings were even easier, and the unit was scewed back into place on the fridge frame. The electric plugs have different sized contacts so you can't mix them up. I put the cardboard shield back on. Viola!
Other Parts Used:
-
Mark from Wolfeboro, NH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable)
214 of 248 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would't fill with water
I first read your forum which was extremely helpful! I checked the continuity of the electromagnetic valve and got a 0 reading on the ice fill valve. The valve next to it which is for the water in the door had a 300ohm reading on my meter. This meant there was a broken wire somewhere in the coil which confirmed the valve was bad. I tried to get the part locally but was told it was on back order! Ordered it thru Part Select at the regular shipping rates and to my surprise it arrived the very next day!
The valve was the new style where you push in the tubing until it locks. I carefully trimmed each tube square with a sharp razor knife, the old valve used plastic compression fittings which had to be cut off.One of the inlet tubes was smaller than the opening on the valve. I then noticed that there was a reducer in the box that snapped into place making the line a perfect fit! Even though the inlet valve looked different than the original it was an easy installation. After replacing it, I had ice again! Totally impressed with the service and how quickly they shipped the parts on the same day! I will never again run around town trying to find parts! Thanks to all of the hard working employees at Part Select!
The valve was the new style where you push in the tubing until it locks. I carefully trimmed each tube square with a sharp razor knife, the old valve used plastic compression fittings which had to be cut off.One of the inlet tubes was smaller than the opening on the valve. I then noticed that there was a reducer in the box that snapped into place making the line a perfect fit! Even though the inlet valve looked different than the original it was an easy installation. After replacing it, I had ice again! Totally impressed with the service and how quickly they shipped the parts on the same day! I will never again run around town trying to find parts! Thanks to all of the hard working employees at Part Select!
Other Parts Used:
-
Jerry from Cooper City, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
167 of 183 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water flow to ice maker. Motor works perfectly.
After cutting supply line to ice maker and using syringe to back feed ice maker discharge outlet- I learned that there was no freeze blockage in supply.
Using nut driver, the valve was removed and electrical and water lines removed and reinstalled on new valve.
Reinstallation of assembly using nut driver completed the whole repair in less than 5 minutes.
The part was a perfect match.
Thanks
Using nut driver, the valve was removed and electrical and water lines removed and reinstalled on new valve.
Reinstallation of assembly using nut driver completed the whole repair in less than 5 minutes.
The part was a perfect match.
Thanks
Other Parts Used:
-
Barbara from Heath, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
112 of 195 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water slowly leaking from fill tube- overflowing ice tray
unplugged fridge, turned off water supply, disconnected water supply line (towel to catch drainage). remove cardboard lower panel from back of fridge. remove 2 bolts holding existing water inlet valve assy to fridge. Disconnect 2 electric plugs from assy. water lines disconnect using push/pull method (mark where they go). If any water tube line has any surface imperfections trim off a small length of line using a razor knife (cut tubing perpendicular (or "square" )on the end. I had to remove small unused part from the new water inlet valve assy. Insert the 3 water lines to the correct spots: push them on,fully, give a tug to make sure they are connected fully. Reattach the 2 electrical plugs.Bolt the unit back in place. I connected the water & plugged it in, filled about 10 glasses of water and made sure an ice cycle ran, to check for leaks (none found). I cleaned off some of the dust on the back of the fridge, reattached the cardboard lower piece. and listened to the sweet sound of Ice filling, and not my wallet emptying to the service man!!
Other Parts Used:
-
Michael from Franksville, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
101 of 109 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water from front dispenser, ice still working
First checked to make sure the water reserve line inside fridge wasn't frozen (soaked coil at back of fridge in a container of warm water for 10 min). That seemed fine and icemaker was still working so assumed that portion of the water inlet valve feeding water line wasn't working. Video on PartSelect website showing how to replace the valve was spot on and gave me confidence to install myself. Part arrived within two days and installation was done in a snap exactly as shown in video. All the lines & wire harnesses fit perfectly, water & ice working great, and I couldn't be more pleased.
Other Parts Used:
-
Trent from Richmond, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Socket set
97 of 115 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old water inlet valve would not close completely, resulting in incessant leaks & puddles on the floor...
I removed the cardboard backer board at the bottom rear of the refrigerator. I had to remove two screws to free the old inlet valve from the frame. The old water tube fittings were compression (screw on) type, so I cut the ends off cleanly with a sharp blade. They inserted into the valve holes easily - just needed a good push to lock them in solidly. The tubes are different sizes, so it was easy to know which one goes in which hole - the electric connectors were easy to transfer from old to new... screwed the new valve back onto the frame, re-installed the cardboard backer, flushed the system -- and no more leaks!!
Other Parts Used:
-
Robert from Franklin, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
60 of 65 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Stopped Making Ice (No Water)
The repair was made simply by removing the old broken Water Inlet Valve (two screws and 4 tubes) and replacing it with the new one. All the tubes and wiring are the same so it was relatively easy to replace. Now we have fresh made ice again
Other Parts Used:
-
John from Vernon, CT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set, Wrench set
49 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water running out of cold water in freezer door
took back of refrigerator, removed water lines, removed electrical connections. removed 2 screws holding water valve, replaced water valve, replaced electrical connection, replaced water lines. Put back on refrigerator. Tested water on freezer door. Didn't work, had to take refrigerator back off again and check the electrical. I didn't get one of the connection put on securely, Put back on refrigerator, check water on freezer door. It worked. Make sure the electrical connection are connected this will sav you about 10 minutes of repair time
Other Parts Used:
-
Jackie from Niota, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
27 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water to icemaker
Unplug refridge, shut off water supply, remove backing. Remove two screws holding in valve, pull out valve and remove water lines. Have towel to wipe up very little water that leaks out. Unplug electric sources, remove old valve. Take new valve , plug in electric sources, push in water supply until they bottom out, attach bracket to back of refridge. Replace backing, turn on water supply, plug in and bleed lines.
Other Parts Used:
-
McManus from Palm Coast, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
27 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
August 12, 2017
I have water coming out water in door but not filling ice maker
For model number GS5SHAXNL00
Hi Fred,
Thank you for your inquiry. It sounds like you might want to test your water inlet valve with multi-meter to see if it is still functioning. There are two solenoids on that part. One for the ice maker and one for the water dispenser. Test both sides just to be sure. Good luck with your repair!
69 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
October 22, 2017
I emailed a few minutes ago about our ice maker not working. We have replaced the icemaker control assembly and the water inlet valve. Still no ice. I forgot to mention that next to the on/off switch for the ice maker, there is a red flashing light. I noticed that someone in their question said something about this light - but didn't explain what it means. Could the red flashing light tell us something about our ice maker not working? Thanks again! I really appreciate your service. Kathy
For model number ksrp25fnss00
Hi Kathy, Thank you for the question. The red light is for the Emitter and Receiver Boards. These boards tell the ice maker to fill and dump ice and when it is time to make more.To test the board you need to open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat,blink blink…. pause, blink blink… pause.Next with the freezer door open, hold down the flapper door on the left side to unblock the optics beam. With the optics unblocked, the LED should light up and stay lit with no blinking. If the status LED continues to blink twice , then you have defective optic boards and they will need to be replaced.If there is no LED light on, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not flash, then the optic control boards will need to be replaced. Hope this helps!
45 people found this helpful.
Was this helpful?
Thank you for voting!
Butch
October 21, 2017
Water dispenser at the door keep dripping a small amount or water after being used icemaker work fine
For model number ED5FHGXNQ00
Hello Butch, thank you for contacting us. It is common over time for the water valve to become faulty and not be able to hold back the water pressure from the home causing some leaks, It may need to be replaced to fix the leak. Hope this helps!
33 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
September 5, 2017
How do you check solenoids on water valve?
For model number ED5KVEXVBO7
Hello Keith, thank you for contacting us. There are two solenoids on the water valve. These solenoids are sometimes referred to as coils. There will be two wires attached to each solenoid. Be sure to label each of the wires so that you are able to properly reconnect them later. These wires are held in place with metal slip on connectors. Grasp firmly on each connector, one at a time, to disconnect the wire from the solenoid. Do not pull directly on the wire, pull from the metal connector.
Set your multitester to the ohms resistance scale X 1. Place each of the meter's probes to one terminal. Because the reading can vary from brand to brand and from model to model, there is no one reading you should receive. However, if your test produces a reading of infinity, then the solenoid is bad and the water valve should be replaced.
30 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
August 23, 2017
What part needs to be replaced if the water supply line freezes due to excess water filling ice maker? Water supply valve?
For model number GS5SHAXNL00
Hello Jeffrey, thank you for contacting us. It could be the water valve. There is also a solenoid in the ice maker that controls the flow of water to prevent overflowing. That could be causing the same issue. PS2341896 Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Casey
April 2, 2018
Water dispenses slowly, low volume a's well as low rate of flow. Have replaced water inlet valve but it hasn't resolved the issue. Perhaps a defective replacement valve or could there be another part causing the issue? Ice maker functions properly without any problems and the rate of flow seems to be unrelated to the filter. Ideas?
For model number KitchenAid KSRX25FSST00
Hello Casey, thank you for your question. The issue could be a defective valve, however it sounds like it may be an issue with the water filter. Have you changed the water filter lately? If not, it might be a good idea to replace that to see if the flow issues are fixed. If the filter has been replaced recently, try removing the filter and reinstalling it to be sure its locked in tight. If the water flow issue continues, i would recommend replacing the Water Dispenser Fitting and Tube Assembly Part Number: PS886371, the Water Dispenser Arm Part Number: WP2180268 as well as the Levers Retainer/Clip Part Number: WP2194719. I hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Andre
October 26, 2017
Ice maker stopped working after replacing the water filter. Water still works from the door, seems like no water is going to the ice maker. I can fill the ice maker by hand so i know the icemaker is working.
For model number 10658963700
Hi Andre,
Thank you for your question. There could be an air pocket inside your water line after replacing the filter. If you can, turn off your ice maker and the back on again and see if that will help it push the air pocket out. You may also want to double check your water inlet valve as well. You have two solenoids on your appliance. One for your water and one for your ice maker. It could be that the solenoid for your ice maker has failed. You can test that with a multi meter. Good luck with your repair.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
August 21, 2017
My frig is no longer dispensing water in the door but the ice maker works. When i press the paddle i can hear a noise but no water comes out!
For model number 106.56692501
Hi Susan,
Thank you for your inquiry. If your refrigerator is not dispensing water, there are a few parts you will need to look at. The most common part that will fix the issue is the water inlet valve. Some other parts that you will have to look at as well are the water filter, the levers retainer/clip, the water filter housing, the water dispenser fitting and tube assembly, the strain relief, the filter inlet water tube, the ice door kit, the water filter cap, the water reservoir tubing, the ice dispenser door chute, and the water dispenser lever. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
October 11, 2017
Hello - my freezer is leaking water on the inside of the freezer and the water is pooling and refreezing under the bottom removable storage bin. Ice maker, ice dispenser and water dispenser all work fine and i can't see a leak as it is small. It takes a couple days for the bottom of the freezer to fill with water and refreeze. It fills up faster if i am making ice or running filtered water, so my guess is that it is leaking while the unit is calling for water. It doesn't appear to leak when ice/water are not being dispensed
For model number ED5VHGXMB10
Hi Jeff,
Thank you for your question. The most common parts that cause leaking inside of your freezer are your ice maker and water lines. I would suggest really taking a look at those parts. If it is not that it may be something that you have inside your freezer that is leaking. You could test your thermostat to see if it is working. Perhaps when your freezer is being defrosted, it defrosts too much? If you need more assistance, you may have to contact your manufacturer. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
November 6, 2017
Refrig has upper and lower icemaker and water dispenser. Water dispenser works fine, lower ice maker works fine, but top ice maker no ice. Motor runs when dispenser depressed but doesn't sound like any water getting to icemaker. Does this model have a separate water valve for each ice maker or does one control all? If u think it is a faulty valve do u sell? Faulty ice maker do u sell? Thanks for your assistance.
For model number RF268ABWP
Hi Tom, Thank you for the question. There is one valve with separate solenoids for each ice maker. The full valve will need to be replaced. PartSelect Number PS4175393.Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3497634
Manufacturer Part Number: W10408179
Manufacturer Part Number: W10408179
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)