Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Catherine
October 11, 2017
Why does it blow cold air?
For model number GTDP740ED0WW
Hi Catherine,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the heating element, the hi limit thermostat, the fuse and the control board. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
RICHARD
January 15, 2019
What does the fuse g.E. Oem part #we1m1002 suppose to do? Seems like it only protects one leg. Cannot find what would cause it to go bad. Can you educate me? Thanks
Richard
For model number gtdp180 ed3ww
Hello Richard, thank you for your question. Fuse WE1M1002 protects the dryer from damage by shutting off the voltage in the event of an electrical short. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
September 5, 2019
Where do i find the fuse.
For model number GTDP200EF3WS
Hello Charles, Thank you for the question. The fuse is located down by the terminal block where the power cord connects to the appliance. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
September 19, 2019
My dryer will not start. Door switch has continuity and so does start button. Belt is not broken. Is there a thermal switch on this dryer? Can it be the fuse? I tried the continuity test on the fuse and it looks ok. What else can it be? Thanks for the help.
For model number GE GTDP490ED5WS
Hello Rick, thank you for inquiring. You will want to consider the High Limit Thermostat part number PS267900, and the Timer part number PS3654187 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Franklin Peyton
February 1, 2020
Won't start any more
For model number GFDS170EHOWW
Hello and thank you for writing.
It certainly sounds like it could be faulty switches PS1481922 and PS2344321, than the fuse, you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
After changing the belt on the dryer and putting it back together, i plugged it back in. Something with the cabinet was not right so i took the from panel off again but for got to
Unplug it again.... a wire touch something and think it blow a fuse. the washer still has power. so could you tell me what fuse it would be or could it be a resistor?
i know better then work on some plugged it!
For model number GTUP240EM1WW
HI Tim,
Thank you for your question. The part number listed under your model number for the Fuse is PS3496852. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. If it is not the fuse causing the issue, you may need to check the electronic control board for signs of damage, wear or burn marks. If it shows any of these signs, it will need to be replaced. The part number for the electronic control board is PS8746229. We hope this helps. Thank you and have a great day.
My GE dryer keeps blowing the 30 AMP fuse located by dryer cord.
For model number GTDP180ED4WW
Hi Paul,
Thank you for your question. If the fuse keeps blowing, the issue could be one of the thermostats not working correctly and you will need to test it with a multimeter. With your multi-meter on the Rx1 setting, test for continuity by touching the probes to each terminal. You should receive a reading of zero or infinity. If your test does not produce either of those readings, you will need to replace the thermostat. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
