Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bert
September 8, 2017
I have dryer wed9600tw1 put power on and push start and a code will flash f01 what do you think the problem is ?
For model number zanaglio
Hi Bert,
Thank you for your inquiry. The F01 error code indicates that you have an issue with your electronic control board. This error may be caused by a power surge or a glitch through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced. I hope this helps.
Was this helpful?
Thank you for voting!
George
April 11, 2018
A no heat problem but more. When I unplug the dryer and then plug it back in after a few minutes the drum turns (the control dial was left on normal) right away but no lights lit on the panel. I press the start button and the lights come on (still no heat). I press the cancel button, no effect. I need to unplug in order for it to shut off. I checked continuity and get .000 on my ohm meter on the heater element and the high heat thermostat and the second thermostat. Any ideas aside from buying a new dryer. It was purchased new in 2008.
For model number wed9600ta1
Hi George, Thank you for the question. Based off this information, it sounds like the control boards may need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3407570
Manufacturer Part Number: W10294709