Maytag/Maytag_Thumb/JO3DJX3W.gif
See part 12 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Terminal and Wire Kit

$80.05   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS334181
Manufacturer Part Number 279318
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will Not Start | No heat or not enough heat
This part works with the following products:
Dryer, Washer Dryer Combo, Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# 279318 replaces these:
AP3133484, 469513, 279318, 339210, 339211, 348912, 348913
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOHN
November 6, 2018
The wire broke at the terminal box. All i need is a new spade clip or end. Do i have to buy the whole wiring kit just to get one wire end?
For model number LE6150XSW0
Hello Jon, Thank you for the question. The spades are only sold as part of the wiring kit sorry. Thank you for your inquiry, good luck with this repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Shatarra
November 26, 2017
Does this kit come with the terminal block?
For model number NED4655EW1
Hi Shatarra, Thank you for your question. It does not. The terminal block is a separate part. I have linked it below for you. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Lisa
January 18, 2020
My wiring kit has 4 wires. A black, white and red go to to terminal block. There is a separate white wire on mine that is fastened to a Green screw. I noticed this kit has a white and Green wire so i’m confused how to hook up. Can you explain this?
For model number WED4800XQ0
Hello and thank you for writing. The black, white, and red go on the terminal block the green /white one is the ground which will go to the green screw. We hope this helps. Please contact us anytime if you require further assistance.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Judith
November 4, 2019
My son-in-law calls it a wire harness and says it looks fried. Are these the ones that would go in there? I also want to know what could have caused this and did it fry the protect motor? We tested the fuses, the switches and the thermostat and the continuity is still there. The unit will not start, any other suggestions?
For model number WED4900XW0
Hi Judith, Thank you for your question. This would not be the correct wire harness. The part number listed under your model number for the wire harness is PS1490143. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Marcy
December 20, 2017
What heating element do i need for this model Kenmore dryer?
For model number 11068132410
Hi Marcy, Thank you for your question. The part number for the heating element listed under you model number is PS11770230. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Maelyn
January 28, 2018
Is there an option to just buy the screws and nuts? I am missing one of the nuts so i cannot screw in one screw. Would rather not buy the whole terminal and wire kit just for one nut.
For model number MEDX600XW0
Hello Maelyn, thank you for your question. Unfortunately, the manufacturer only sells these parts as a kit. You would have to order the set of parts. I hope this helps!

Was this helpful?
Thank you for voting!
Dianna
December 14, 2019
It’s a thermal switch wires are hooked up wrong with the dryer still start but then shut off later
For model number Wed8500dc4
Hello Dianna and thanks for writing. Yes, the wrong wiring could cause this. It also could be a faulty thermostat internal PS11746740 test the part after you check the wires and replace it if needed. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
Related Parts:
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334181
Manufacturer Part Number: 279318
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10688419100
Dryer
Kenmore
10688419300
Dryer
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11016611690
Washer
Kenmore
11016612690
Washer
Kenmore
1101820299
Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service