Part Location Diagram of WR30X256 GE Ice Dispenser Bucket
See part 283 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Ice Dispenser Bucket

$120.49
  Special Order
PartSelect Number PS300117
Manufacturer Part Number WR30X256
Manufactured by GE
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WR30X256 replaces these:
AP2068521, 301297, WR30X0256
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 9 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
broken bucket and drive cup
turned the ice maker off then removed the ice bucket and place the ice into a bucket then removed the 6 screws that hold the front plate to the bucket. then replace the bucket and front panel. Replaced the ice cubes into the bucket and test the agruer that ice dispenser and turnred ice maker back on
Other Parts Used:
Ice Dispensing Drive Cup Ice Maker
  • David from Lawrenceville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original ice bucket had a broken auger guide
the parts arrived the next day!!! Awesome.

Detached the original bucket from the dispenser face plate by removing all screws. Must remember where all the screws go. Attached new bucket to original dispenser face plate. Very easy.
Other Parts Used:
Ice Bucket Seal Dispenser Grille
  • harvey from shawnee, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken
Replaced broken parts. The ordered parts were received in record time after placing the oreder.
Other Parts Used:
Ice Dispensing Drive Cup
  • Joe from White Hall, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker bump and grind
The ice bucket supports had split, and broken away from the refrigerator wall causing the ice dispenser bucket to sag, and bump and grind. The b&g wore away the ice screw support at the rear of the bucket, causing intermittent ice dispensing. The ice bucket was removed to allow access to the ice bucket supports. The supports were attached to the refrigerator by two screws. One along the front side, the other at the rear attached to a protruding tang. One of these broken off, the other was stuck, and had to be forced off its mount. The rear mount was expanded by drilling a slightly larger hole to accommodate a nut and bolt assembly. The new support units were re-attached to the refrigerator front and back using screws and the nut and bolt in the appropriate places. The ice bucket installation was a tad more difficult. The hardware from the original bucket was removed and installed on the replacement bucket. This proved to be a bit tricky remembering the exact location of the parts, and coordinating the screw mechanism with the driver mechanism. The ice fill starter switch is a bit unusual in that it has to go into a slot that is not visible when inserting the ice dispenser bucket into the ice maker compartment. You have to finagle the bucket into place and get all the parts in the correct slots. It was a piece of cake for the average husband.
Other Parts Used:
Ice Bucket Support - Right Side Ice Bucket Support - Left Side
  • M R from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The selector switchhas been broken for years but was still usable .
When the ice bucket self destructed I had to repair . I had know problems. The realistic time frame was do to cleaning ten years of dirt and calciumdepostes off. I used about a quart of CLR the wires on the switch are very short used needle nose pliers to put the connector back together. Shouldn't be a problem for any one to repair.
Other Parts Used:
Dispenser Control Board - 2 Slide Switches Knob Ice Dispensing Drive Cup
  • Joseph from Steger, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic on ice hopper that helped stabilize the auger
Emptied hopper
Removed screws to remove auger from existing
This was so easy I impressed my wife
Other Parts Used:
  • Phil from MADISON, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic guide in rear of bucket broke it guides auger when dispensing ice
I simply removed 6 screws that held bucket to face and pit on new bucket and put it back in freezer works great
Other Parts Used:
  • Robert from FIFE LAKE, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hole in bottom of ice bucket
Transferred ice supply to another freezer. Removed ice maker unit from freezer and studied assembly. Removed the 5 screws holding the bucket in place while keeping track of which screw went where. The only positional component to remember was the motor control pivot retainer. Wiggled and fiddled to remove the old bucket. Wiggled and fiddled to put the new bucket in place. Replaced the 5 screws, dumped the reserved ice back into the bucket, and returned the ice maker unit to the freezer.
Other Parts Used:
  • William from Arrroyo Grande, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ice bucket
Very easy to repair-Went online-Found diagrahm-Ordered part-and presto it was fixed.
Very good schematic to go by. If you can read you most likely can fix it.
Other Parts Used:
  • john from milford, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Johanna
October 25, 2022
My ice bucket is broken needs new one
For model number TFS26PPDA
PartSelect logo
Hi Johanna, thank you for getting in touch. We have researched the model you provided and found that the part you are looking for is part number PS300117. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS300117
Manufacturer Part Number: WR30X256
Brand
Model Number
Description
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36357552790
Refrigerator
Kenmore
36357552791
Refrigerator
Kenmore
36357557790
Refrigerator
Kenmore
36357557791
Refrigerator
Kenmore
36358541890
Refrigerator
Kenmore
36358542890
Refrigerator
Kenmore
36358547890
Refrigerator
Kenmore
36358551890
Refrigerator
Kenmore
36358551891
Refrigerator
Kenmore
36358551892
Refrigerator
Kenmore
36358552890
Refrigerator
Kenmore
36358552891
Refrigerator
Kenmore
36358552892
Refrigerator
Kenmore
36358557890
Refrigerator
Kenmore
36358557891
Refrigerator
Kenmore
36358557892
Refrigerator
Kenmore
36358572890
Refrigerator
Kenmore
36358572891
Refrigerator
Kenmore
36358572892
Refrigerator
Kenmore
36358575890
Refrigerator
Kenmore
36358575891
Refrigerator
Kenmore
36358575892
Refrigerator
Kenmore
36358577890
Refrigerator
Kenmore
36358577891
Refrigerator
Kenmore
36358577892
Refrigerator
Kenmore
36358772890
Refrigerator
Kenmore
36358772891
Refrigerator
Kenmore
36358772892
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service