This white door gasket is used to seal the freezer door when closed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR24X527 replaces these:
AP2067979, 300830, WR24X0527
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gaskets worn out, needed replacement
I got both doors out of their hinges and on a pair of sawhorses, this way it is a lot better to work on the doors because you can walk around and really see what you are doing. Truly, once you get the doors out, rest them on the sawhorses, and use a socket driver/screwdriver to release the metal strip that holds the gaskets. When you remove all screws, the whole inside plastic part of the door will be loose. Get a dampen cloth with dish detergent and clean where the rubber is worse: usually at the bottom of the doors. To realign the doors, the trick is the centeral screw: instead of a oval/oblong hole, it is just a round hole, so, once you align those 2 screws, the inner component of the door will be aligined. Now, unpack the the new gasket, follow the instructions to soften it up with hot water and put it in its place. Trick #2: before you order the darn thing, make absolute sure you have the right size of the gaskets. The heights of mine were ok, but the width were not ! Dang ! PartSelect website did not have the correct descriptions and I ended up with basically two for the freezer door side... I didn't want to send it back because of the $$$ and worse, I needed it on that day, so I made an amendment with the old gasket .... So, to save the headache, before you order, get the part number on the website, measure your refrigerator and call the customer support to make sure the fit will be the correct size. Anyway....
Once you get the new gasket resting in place, slide those metal braces inside the gaskets. It's better to have all 4 in place before you screw any one of them. Start with the 2 central (round) holes on each side of the door, then immediately do the corners cuz they are the ones to give you a "pain in the neck" to put in place. Once you got the corners, it's a matter of just put the other screws and make sure the metal brace is covering the "round border" of the gaskets. ***** The screws DO NOT pierce the gaskets.
Make suere the gasket rests squarely on the inner side of the door and tighten everything.
Repeat for the other door.
Put the doors back in the hinges and make sure they close properly. You may need to release and re-tighten some screws in order to get a smoth closing.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
January 16, 2018
My freezer door will not stay closed, lately i have often found it ajar. I have checked and cleaned seal and freezer door area. There is nothing obstructing door from shutting. Could the seal be worn out and no longer holding the door closed
For model number TFX22ZPBAAGE
Hi David,
Thank you for your question. There are a few parts that you will have to look at. I would suggest taking a look at your cams and bushings, make sure that they are not worn down. You should also check to see if your appliance is level, sometimes when it is off level the doors will not stay closed. It could also be your gasket, so I would suggest checking the first two things and if they are fine then it could be your gaskets. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS297146
Manufacturer Part Number: WR24X527