This part may differ in appearance, but functions same as original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE18X54 replaces these:
AP2043595, 2311, WE18X54, WE18X0054
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 25 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My old filter had a broken frame and ragged screen
Replacing the filter only required removing the old one and replacing it with the new part which fit perfectly. I received the part two days after placing my order.
Other Parts Used:
JoAnn from St Petersburg, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
42 of 47 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer performed erratically. Timer stopped. Heat element would not come on.
Removed two torx screws from the control panel. Removed timer with socket wrench and disconnected socketed electricals. Everything went slick.
My dryer was starting to throw a lot more heat than normal. I clean my lint filter every time I use the dryer. What I didn't realize was that over time, the lint filter had warped enough to allow lint to escape into the dryer and subsequently into the dryer vent system, clogging some areas almost
I opened the vent system (screwdrivers to loosen screws) and used the shopvac hose and my hands to clean out what I could. I also snaked the shopvac hose down into the dryer and removed clogged lint. Then I just replaced the lint filter.
Other Parts Used:
Nancy from Dalton, PA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
10 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door handle was broken off and i needed a new lintfilter
door handle just snaps right in and the lintfilter is a no brainer. thank you very much partselect keep up the good work
Old Lint Filter got worn down over time and broke in half
I repaired it by logging on to parts select website and found the part, waited for about a week or so and opened up the box. I glanced at it and found out that wow it's the exact match except new. Unbelievable and in excitement I went to my laundry room and opened up the dryer and popped that baby right in! Thanks Parts Select
Other Parts Used:
Eric from Country Club Hills, IL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torn screen in lint trap.
Easy. Take old one out, put new one in.
Other Parts Used:
Carrie from Santa Maria, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer timer function stopped working & The Dryer will not shut off also, The Lint Filter was torn..
I unscrewed the backside top part of the dryer with a 5/16 nut driver then, removed the damaged timer assuring I marked the wires harness correctly with the new timer. I removed the damaged timer and inserted the new timer I then replaced and screwed in the backside top of the dryer. The Lint Filter with frame removed without difficulty (without any tools) and, I installed the new Lint Filter with frame with no trouble. The Job was completed in less then 12 minutes.
Pull old one out stick new one in. Less than 1 minute. Last repair was the water pump that was easy.
Other Parts Used:
Michael from Beverly, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was old and cracked, wore out
Pulled old lint filter frame out and replaced with new one, very simple. works like new.
Other Parts Used:
Kevin from Jackson, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
January 13, 2018
I need a new lint filter for my GE dryer. The booklet that came with the dryer states models dde7905s dde7900s ddg7985s ddg7980s and i am not sure which one i have. On the door it has dde7900svlww and i think that one i saw on your website is the right one but i wanted to make sure before ordering. I would appreciate any help you can give me. My dryer is still going strong but it needs a new filter. Thank you
For model number DDE7900SVLWW
Hello Linda, Thank you for your inquiry. The correct model number would be on the appliance itself as the manuals often cover more than one model. We do show that this is the correct lint filter for the model you supplied. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
January 5, 2018
The opening for the lint catcher is...14x 2 1/4...need the replacement lint catcher...ty
For model number DVLR223GV0WW
Hello Ron, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS266269. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
December 6, 2018
Lint trap appx 14x3 GE
For model number dblr333et0ww
Hi Gary, thank you for your question. This would be the correct filter for this appliance. I hope that helps. Good luck with you repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
July 23, 2019
I would like to order a new dryer filter for this model. I don't see it listed. Perhaps another model number will fit.
For model number DDE7208MCLWH
Hello Linda, thank you for your question. The lint filter for this unit is PartSelect Number: PS266250. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
August 21, 2019
Kenmore dryer filter. Plastic part that attaches to the filter is broken. The whole filter is approximately 7 by19. Really only need the plastic part.
Hello Ray , thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
January 31, 2023
This is the only numbers I can read on my hotpoint dryer its missing letter or letters model # is VR305142H I need a new lint trap for my dyer I think I found it on here but can you see what you find
For model number NJLR473GTOW
Hi Patricia, thank you for contacting us. The lint trap for your model number NJLR473GT0WW is part number PS266269. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steven
July 13, 2021
I have a very old dryer. A beaumark. Still works but the lint trap is broken. I believe part number we18x54 is what I need to replace, but unsure
For model number 63190439
Hello Steven, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS266222. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
For model number Maytag MD-6 odel MDE4000AYW (Model MD4000)
Hello Ed, Thank you for your inquiry. We show the part number for the lint filter for your model as WP33001808. It is a rectangular filter approximately 12 1/2 inches in length. Hope this helps!
Was this helpful?
Thank you for voting!
Val
February 28, 2018
Lint filter number?
For model number DBLR333EE0WW
Hello Val, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11767017. Hope this helps!
Was this helpful?
Thank you for voting!
Julie
April 19, 2018
Need a new lint filter where can I get one
For model number DWLR473ET0WW
Hi Julie, Thank you for the question. If you wish to place an order, please do not hesitate to process the order online or give our customer service a call. You are also welcome to visit our new Live Chat, Monday to Friday from 8AM to 4PM EST at www.partselect.com. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
