GE WD12X10054 - Middle Spray Arm Conduit Carrier | PartSelect.ca
Middle Spray Arm Conduit Carrier – Part Number: WD12X10054
( Grid squares measure 1x1 inch )
Middle Spray Arm Conduit Carrier – Part Number: WD12X10054 Middle Spray Arm Conduit Carrier – Part Number: WD12X10054 https://partselectca.azureedge.net/Schematics/GE/00125643i03.gif

Middle Spray Arm Conduit Carrier

Your Price

CAD$7.84

PartSelect Number PS259072
Manufacturer Part Number WD12X10054
Manufactured by GE

This piece attaches the spray arm conduit to the upper rack.

This part works with the following brands: General Electric.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Not cleaning dishes properly

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Warren from Stillwater, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WD35X20994, WD28X10391, WD28X25960, WD12X10304, WD12X10054, WD12X10391
Top and bottom rack were rusted thru
Bottom rack - slide the old one out, slide the new one in. The rack came came with the wheels, so I didn't use the replacement ones.
Top rack - remove the rail end caps - they will likely break so order new ones. Slide the rack out. Remove the rotating spray arm and then remove all the brackets. I was able to re-use the old brackets and didn't need the replacements. Install the old brackets on the new rack, install the spray arm, and slide the new rack back into the rails. The new top rack also came with wheels installed, so I didn't use the replacement ones. Once the rack is back in the rails, install new rail end caps. Put them in sideways and facing into the washer. Straighten the caps and turn them into place. Be careful with the rail caps - they break easy and are expensive. Make sure they hold the top rack in place, and that's it.
29 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Joel from Temple, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WD02X10169, WD22X10046, WD12X10352, WD12X10054, WD12X10391, WD12X10052, WD02X10067
the spray arm was off and without brackets
I looked at the diagram on the web site, the same one that I ordered from, and figured out how all the parts were suppose to go together. The spray arm has 2 brackets so it was a matter of aligning the tube that feeds the spray arm with the supply line on the back of he dishwasher. I had to move it once to get it properly aligned but found it to be simple.
7 of 21 people found this instruction helpful.
Was this instruction helpful to you?

Model Cross Reference

Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher
General Electric
4071510
General Electric
4071520
Dishwasher
General Electric
4071600
Dishwasher
General Electric
4071610
General Electric
4071620
Dishwasher
General Electric
EDW4000G00BB
Dishwasher
General Electric
EDW4000G00CC
Dishwasher
General Electric
EDW4000G00WW
Dishwasher