Product Description
Timer Knob Specifications
This part is the replacement timer knob for your dishwasher. It is made of white plastic with a gray indicator line, and it is approximately 2 inches long and 1 inch wide. The timer knob turns on the shaft and allows you to choose the correct setting for your dishwasher. The main reason you would be replacing this knob, is if the old one is broken or stripped, and it will not turn the shaft. To replace this knob, carefully remove it from the shaft, and replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD09X10025 replaces these:
AP3425315, 876887, WD9X10025
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Nir W - December 2, 2021
Verified Purchase
Perfect part and oh my, so fast!
I'm in awe, I've ordered a very specific part, not expecting it to be available (if I recall correctly it was marked as not in stock, which made sense), but lo and behold, I got the part in less than 2 days. This is astonishing! It's faster than Amazon, almost as fast as raining down to a physical store, but a store that has everything. E-V-E-R-Y-T-H-I-N-G! Kudos partselect, kudos.
Olivier V - March 26, 2021
Verified Purchase
Easy repair
Great, easy repair
Brenda C - June 24, 2020
Verified Purchase
Too easy
The part was exactly what I needed. Not only that but it arrived in two days. I was a little ticked at the time of order as the shipping was more than the part. In the end I was most grateful. Thank you
Rafik B - May 8, 2019
Verified Purchase
perfect fit
Ordered it, even if it was more expensive than other sites, it fitted and saved the office dishwasher from a 500$ expense....
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Old Timer Knob was Broken
Took off old timer knob and pished new knob in to it's place.
Other Parts Used:
-
Samuel from Celebration, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced timer knob
lol it just slip on in 2 seconds...but i like to thank you for your prompt service and very informative site
Other Parts Used:
-
jim from st augustine, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not turn on
Basically a broken timer knob. A replacement was exactly what was needed. Perfect fit and part. Excited I don't need a new machine. Just insert new part!
Other Parts Used:
-
Edith from LAKEVILLE, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Timer Knob
There is nothing worse than having a knob break off when using the dishwasher. The great thing is that I was able to go on the internet and found your supply outfit. I ordered the replacement and had it to install in less than 48 hours. The knob was the right one and now I use the dishwasher again TNX
Other Parts Used:
-
James W from Huntley, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old timer knob broke
1. Disconnect power
2. Remove inner door panel
3. Remove timer assembly
4. Look up model and part #
5. Review schematics and order part
6. Replace timer assembly
7. Replace inner door panel
8. Install new knob
9. Plug in power
10. Run through washing cycle
DONE!!!
2. Remove inner door panel
3. Remove timer assembly
4. Look up model and part #
5. Review schematics and order part
6. Replace timer assembly
7. Replace inner door panel
8. Install new knob
9. Plug in power
10. Run through washing cycle
DONE!!!
Other Parts Used:
-
Kenneth from WITTMANN, AZ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kay
April 21, 2018
When i turn the knob to start my dishwasher nothing happens. I can hold the knob and my dishwasher does start to get water.
For model number GSD2600G02ww
Hello Kay, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: interlock switch, door latch kit, timer, timer knob, and pump and motor assembly. You can test the parts with a multimeter to see if they have continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 12, 2020
I ordered the timer nob wd09x10025 to replace the broken timer nob. The stem/shaft broke off at the nob and the stem/shaft is still attached to the timer.How do you take the broken stem or shaft out of the timer.
For model number GSD3300K00WW
Hello Richard,
Thank you for your question. You will need to remove the control panel to be able to access the timer behind it, then you should be able to remove the stem already attached. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeanette
February 6, 2019
What is the depth of this part? The knob on my dishwasher is cornered next to a drawer and the part sticks out too far. The drawer will not clear it. I have to remove the knob.
For model number 165D5843
Hello Jeanette, Thank you for contacting us. This knob is approximately 2 inches long and 1 inch wide. Good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS258821
Manufacturer Part Number: WD09X10025
Manufacturer Part Number: WD09X10025
Brand
Model Number
Description