Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
September 7, 2017
Microwave acts as if it is unplugged. Sounds like the fuse to me. Is there something that would have caused the fuse to fail that i might need to replace ? Or should i try just replacing the fuse ? Thanks, richard
For model number JEM31SF001
Hi Richard,
Thank you for your inquiry. There are a couple of parts that could cause your appliance not to turn on. Your fuse is one of them. I would also suggest checking your door switches as well. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
September 2, 2019
We heard electrical buz & no further power. How do I get to the fuse?
For model number JVM139K01
Hello Joe, Thank you for the question. Generally the fuse is located next to the magnetron and the capacitor so the outside cabinet panel will need to be removed. The appliance can hold a charge even unplugged, so if you are not comfortable performing the repair, we suggest contacting a repair man. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Manuel
January 1, 2024
The touch pad is working. The fan goes on. But it does not heat. Could it be the fuse? I mean, would the touch pad and fan still work even if the fuse goes bad?
For model number ZMC1095SF03
Hi Manuel, thank you for contacting us. Based on our understanding, the issue is not with the fuse. The fuse protects the microwave from damage by shutting off the microwave if there is a power surge. We would recommend checking the high voltage diode, part number PS239740. It is an electrical current control device inside the microwave. It provides high voltage that powers the magnetron. You may need to replace it to fix the issue. We hope this solves your problem!
I see the fuse in the parts diagram. When taking off the back panel where exactly is the fuse? I want to avoid taking anything apart I don't need to disturb. Thanks. John
For model number JEM25DM3BB
Hi John, Thank you for the question. Generally the fuse is located next to the magnetron and the capacitor. Hope this helps!
Was this helpful?
Thank you for voting!
Sonia
March 26, 2024
The control dashboard is not working but when the oven door is opened. The oven light comes on. I believe power is getting into the oven but the contol panel is dead. What are my options
For model number ZET3058SH1SS
Hi Sonia, thank you for reaching out. We would suggest checking the wire harnesses of the display boards first. If these are fine, the issue could be with the main logic board, part number PS953784. It monitors the temperature and controls the oven heat. You may need to replace it to fix the issue. We hope that helps!
Hello Ken, thank you for the question. You can follow these instructions to remove the filter. Unthread the screw securing the outer case. Remove the cover. You may need to discharge the capacitor by putting the legs of nose plier on the terminal of the capacitor. Now you will have access to noise filter. Remove the fuse and replace it with the new one. We hope this information helps!
Was this helpful?
Thank you for voting!
Jay
October 9, 2017
I had the timer on and when the time was up the microwave shut down and went dead. I could not turn it back on. Is there a simple explanation? Should I just replace the microwave with a new one or do you think it may be just the fuse?
For model number JEB1095BB002
Hi Jay, Thank you for the question. If there is no power at all to the appliance, I will suggest starting with the fuse. If the fuse does not fix the issue then the control may need to be replaced,PartSelect Number PS239717. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS239596
Manufacturer Part Number: WB27X10454