Average Repair Rating: 3.2 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
burner would not light
replaced switch
Other Parts Used:
Jimiego from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
7 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ignition
replace parts and plug in wire harness as you go.....clean up old seal area on burner bowl and stove top...install new seals.....done.....saved $400 in repair labor or $1200 for new stove top.....
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
May 7, 2018
Hello, i need to replace a couple of ignition valve switches on the GE cooktop. Your parts list shows two different part numbers for this switch. Pn: Ps236635 for $28.48 and pn: Ps236639 for $18.23. What is difference and which is applicable as all the ignition switches on the stove appear to be the same? Second, could you explain how i separate the glass white top from the burner bottom box in order to gain access? It seems they are stuck together but not sure if this is from 20 years of use. Thank you.
For model number JGP636WEV6WW
Hi Greg,
Thank you for your question. Part number PS236635 are for the front burners and PS236639 are for the rear burners. In regards to the cooktop, before you begin any repair please turn the power supply off at the junction box and unthread the screws securing the junction box cover and remove the junction box cover. Untwist the wire nuts to disconnect the power grounding wires. Loosen the conduit connector screw or screws, then remove the conduit cable from the junction box. Next use a Phillips head screw driver to remove the clamping screws from the clamping brackets. Use a quarter inch socket or nut driver to loosen the adjustment screws securing the clamping brackets. Rotate the brackets inwards and tighten the screws. You can lift the cooktop out of the cut-out in the counter and place it on a sturdy surface. Using a Phillips head screw driver or a quarter inch nut driver, remove the screws securing the glass panel to the cooktop. Then carefully lift the old top off. Before installing the new glasstop, make sure the elements are in the proper positions. Align the glasstop on the base and then secure it with the screws. With the glass now installed, you will need to lay it upside down on a padded surface because you will need to new protective foam strips on the underside of the top on all sides. Once completed, realign the cooktop in the counter and reposition it. Follow the remaining steps in reverse. Restore power to the cooktop and everything should now work for you. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236639
Manufacturer Part Number: WB24K5083