Part Location Diagram of 7507P395-60 Whirlpool Bake Burner Orifice Tubing - Lower
See part 24 in the diagram
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Bake Burner Orifice Tubing - Lower

 Fits your MGR6751BDW18 Range!
$145.75
  Special Order
 Fits your MGR6751BDW18 Range!
PartSelect Number PS2366014
Manufacturer Part Number 7507P395-60
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Maytag, Kenmore, Jenn-Air.
Part# 7507P395-60 replaces these:
74011296
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GARY
February 18, 2023
Since Thanksgiving, our lower oven has apparently been offering a slight BOOM when turned ON, after 30 seconds or so. I thought it may be an igniter not getting hot soon enough. I replaced the igniter, and the BOOM remains. My U-Tube research suggested (1) faulty ignition ports on the burner tube, (2) an igniter that is not heating-up properly due to a faulty resistance, and (3) an igniter that needs an adjustment to be closer to the ignition ports. Before I look into all of these, do you have any other thoughts? Note that the burner tube ports that I can see look perfectly clean and not rusted; I will need to remove the igniter again to view the ignition ports. I also learned that the igniter and gas valve feeding the burner tube are wired in series, as a safety measure. ALSO, the oven does NOT boom after the initial ignition when the oven is first turned ON. Thanks in advance for any thought you may have, as my next move is likely a new burner tube and/or gas valve.
For model number MGR6775BDS
PartSelect logo
Hello Gary, Thank you for your inquiry. When you hear a boom in your gas oven while it is preheating, what you are hearing is a delayed ignition of the gas. How it is supposed to happen is that the igniter lights a small amount of gas to start the process. However, when that doesn’t happen and the gas builds up, it caused the small boom of it igniting all at once. Most of the time, it can be caused by a dirty igniter, a clog in the burner tube or low gas pressure-which may need to be checked by a gas specialist. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2366014
Manufacturer Part Number: 7507P395-60
Brand
Model Number
Description
Kenmore
66578002700
Range
Kenmore
66578002800
Range
Kenmore
66578002801
Range
Kenmore
66578002802
Range
Kenmore
66578002803
Range
Kenmore
66578003700
Range
Kenmore
66578003800
Range
Kenmore
66578003801
Range
Kenmore
66578003802
Range
Kenmore
66578003803
Range
Kenmore
66578003804
Range
Kenmore
66578009700
Range
Kenmore
66578009800
Range
Kenmore
66578009801
Range
Kenmore
66578009802
Range
Kenmore
66578009803
Range
Kenmore
66578009804
Range
Jenn-Air
JGR8890ADP
Range
Jenn-Air
JGR8890ADP13
Range
Jenn-Air
JGR8890ADP14
Range
Jenn-Air
JGR8890ADP20
Range - FREE STANDING - GAS
Jenn-Air
JGR8890ADP21
Range - 30" GAS FREESTANDING RANGE
Jenn-Air
JGR8890ADP22
Range - 30" GAS FREESTANDING RANGE
Jenn-Air
JGR8895BDS12
Range - GAS RANGE
Jenn-Air
JGR8895BDS13
Range - 30" GAS FREESTANDING RANGE
Maytag
MGR6751BDB
Range - Freestanding, Gas
Maytag
MGR6751BDB18
Range - 30" GAS RANGE
Maytag
MGR6751BDB19
Range - 30" GAS FREESTANDING RANGE
Maytag
MGR6751BDS
Range - Freestanding, Gas
Maytag
MGR6751BDS18
Range - 30" GAS RANGE
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service