Temperature Sensor Kit WB23X5340

Hi Laura, Thank you for your inquiry. On modern electronic control ranges, the oven temperature sensor is the part that monitors the oven temperature and signals the electronic control to turn the elements on and off. I hope this helps. Thank you and have a great day!

Hello Dallas, thank you for your question. If the unit is not reaching temperature, and remains on preheat. I would recommend replacing the temperature sensor first. This is the most likely issue when a unit doesn't heat to the selected temperature. Temperature Sensor Kit part number WB23X5340 would be the part to order. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hi Craig, Thank you for the question. When the oven has an uneven temperature it is most likley the oven temperature sensor.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

Hello Bill, Thank you for the question. You can try testing the sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor is good, you may need to replace the control board, PartSelect Number PS238571. Thank you for your inquiry, good luck with this repair!

Hi David, Thank you for your question. If your oven is not staying at the temperature you have selected, then the issue is likely with the temperature sensor. You will need to check the sensor, the wiring between the sensor and the electronic control board, the electronic control board and both the bake and broil elements in the oven with a multimeter to see which part is causing the issue. I hope this helps. Thank you and have a great day!

Hello Tracy, thank you for your question. Yes, that does sound like it could be the sensor. If the sensor is replaced and the issue continues, the electronic board assembly could be the problem. I hope this helps!

Hello Jeremy, thank you for your question. If the sensor, and elements are testing within range the issue could be the electronic control board. I would suggest re-testing the sensor, and perhaps taking the plunge and replacing that part as its less expensive than the board, and usually if the board is bad the oven won't heat at all. However, the thermostat might be working intermittently and is ultimately sending mixed signals to the board. I hope this helps!

Hi Derek, Thank you for your question. The oven sensor could be causing this. f the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. You should also check the electronic control board and the wiring between the sensor and the electronic control board to see which part is causing the issue. I hope this helps. Thank you and have a great day!

Hi Kevin, Thank you for your question. If the oven is still on after you turn it off, there is likely an issue with the electronic clock control board, part number PS238550. Check the board for signs of damage or burn marks and if it shows any of these signs, you will need to replace it. I hope this helps. Thank you and have a great day!

Hello Ed, thank you for your inquiry. If your bake element is not heating, then it is most likely faulty or damaged. We recommend replacing it. For your model RB757WH4WW, the bake element is part number PS249238. I hope this information helps!