Part Location Diagram of 240350903 Frigidaire Crisper Drawer Cover - NO Glass
See part 25A in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Crisper Drawer Cover - NO Glass

★★★★★
★★★★★
1 Review
$102.60
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2361213
Manufacturer Part Number 240350903
Manufactured by Frigidaire
Product Description

Crisper Drawer Cover - NO Glass Specifications

This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 240350903 replaces these:
AP4428230, 1512514, 240350903, 240350901, 240350902
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 13 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
Other Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included Crisper Cover Support - Front Door Bin Refrigerator Door Bin
  • Fred from Plano, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
214 of 398 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic guides on both crisper drawer covers. Upper crisper pan broken. Broken supports.
Remove both crisper pans and covers. Discard old frames and re-use glasses. Use two screw drivers to gently pry out broken supports. Top broken off smooth on one support. Unable to grasp with pliers to pull out. I drilled a small hole in the center of the large expansion pin. I screwed in a small sheet metal screw. Used side cutter pliers to grasp screw and gently rock back and forth to remove center of large pin. Plucked out broken pieces with needle nosed pliers. Gently tap in expansion pins to install new supports. The rest is simple re-assembly using new parts. "Nothing to it but to do it."
Other Parts Used:
Crisper Cover Support - Front Crisper Support - Rear Upper Crisper Drawer Cover - Glass NOT Included Refrigerator Crisper Drawer
  • John from JASPER, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
23 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic crisper pan cover and supports broken
This is the second time I've had to replace the crisper cover, so I had that step mastered. As before, I took the glass from broken crisper cover and dropped it into new cover in seconds. Had to use a screwdriver to pry old crisper supports from the walls of the fridge. This was the only hassle. Popped new supports in, replaced crisper covers, and slid crisper drawers back into place. From now on, I'll have to be more careful about how much weight I put into crispers.
Other Parts Used:
Crisper Support - Rear
  • Paul from Mobile, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer was cracked and shelf was broken on one side
No repair needed just replace shelf and drawer
Other Parts Used:
Refrigerator Crisper Drawer
  • Karin from FAYETTEVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelves Were Broken
Ordered the shelves from partselect. Com and just replaced the new shelves in the space where the old shelves were.
Other Parts Used:
Shelf Insert Glass
  • Kim from Belle Glade, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drawer
I took out the broken drawer and replaced it with the new drawer
Other Parts Used:
Refrigerator Crisper Drawer
  • Fatima from STATEN ISLAND, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem
As it turns out when i pulled the drawer out and then the door holder i discovered that there was a big piece of material that was suppose to be around the water line that was causing the problem. The old drawer holder was not the problem so the new piece was not needed. All is well.
Other Parts Used:
  • Donald from SAN CLEMENTE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken cover
took out the glass popped out the cover and put the new one on and put the glass on. DONE
Other Parts Used:
  • harry from long beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer support rails
I took out the shelves that the supports were on and replaced the parts very easily. study it a moment before taking off the old and then snap on the new.
Other Parts Used:
Meat Pan Rail - Left Side - White
  • Kimberley from East Schodack, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken and cracked
just replaced the old broken one and put the drawer back .
Other Parts Used:
  • zenaida from lemoore, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

54 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
December 16, 2017
Need the shelf right above the top drawer. The lower 2 shelves with drawers under have a reinforced plastic . This top one is not reinforced ( but should of been, it broke in the front center.) also is a little wider than the other 2 shelves below. The refrigerator steps in about 1/2" on each side. Which piece do i need.
For model number FGHS2669KE
PartSelect logo
Hello Mark, Thank you for your inquiry. The shelf that holds the top drawer (meat/deli drawer) is part# 241969501 for the frame and part# 240443384 for the glass. Good luck with your repair!

31 people found this helpful.

Was this helpful?
Thank you for voting!
Ivette
April 5, 2018
I need to replace chill drawer (top drawer of 3 total drawers, other drawers are fresh) and the frame (not the glass). What parts do i order? Thank you.
For model number FPHS2687KF2
PartSelect logo
Hi Ivette, Thank you for your question. The part number listed under your model number for the chill drawer or meat pan is PS2363833 and the part number listed under your model number for the meat pan shelf frame is PS2363832. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Jason
August 19, 2019
The frame for our chill drawer is broken. It measures about 15 3/4" by 16 1/2". Just trying to make sure I order the right part. Thank you!
For model number FGHC2342LF3
PartSelect logo
Hello Jason, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2378645. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
TERESA
February 1, 2020
The drawer cover at the bottom is broken for me and i still have the glass. But i cant find the shelf without the glass
For model number FFUS2613LS0
PartSelect logo
Hello Teresa, Thank you for your inquiry. The part number for the drawer cover at the bottom for your model is PS2361213. Hope this helps.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Clyde
March 26, 2020
I need the upper crisper pan frame that the glass fits into. I need the plastic frame? Not sure which part number I need.
For model number FGHS2631PF4A
PartSelect logo
Hello Clyde, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS899475. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
September 22, 2017
I am looking for the glass insert for the lower crisper bin. That part is 240350903, but comes without . Says glass must be ordered separately....i just need the glass ! how can i order that from you?
For model number FFHS2611PFEA
PartSelect logo
Hello Tom, Thank you for the question.The glass for the bottom crisper cover is PartSelect Number PS429962. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Elena
November 30, 2018
Hi, i need 3 shelves that hold all three drawers in the fridge, don't need glass for any of the shelves. The shelf that holds the top drawer (meat/deli drawer) , shelf for the middle biggest drawer and shelf for the bottom fruit/veg drawer.Thanks
For model number FLSC238DS6
PartSelect logo
Hello Elena, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS2378645 for the top Meat Pan Shelf/Cover. Part Number: PS899475 for the Upper/Middle Drawer Shelf/Cover and Part Number: PS2361213 for the bottom Shelf/Cover.Thank you for your inquiry, good luck with this repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Walter
April 10, 2018
I need the top and middle clear plastic drawers what parts do i need to order?
For model number FGHS2631PF4A
PartSelect logo
Hello Walter, thank you for your question. The top plastic drawer is PAN-MEAT Part Number: PS2363833 and the middle one is Crisper Pan Part Number: PS2361214. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
David
January 3, 2020
My top shelf of the 3 in my refrigerator has broken in the center it is the wider of the 3 shelves the bottom 2 are the same, could you please advise which i will need?
For model number FGHS2631PF4A
PartSelect logo
Hi David, if you are talking about the top shelf above the deli drawer, the part number is PS2363832. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Monique
March 3, 2018
I need the frame for the fresh drawer and the fresh drawer, do you have this available?
For model number FFSS26D8RS0
PartSelect logo
Hello Monique, Thank you for your inquiry. Part# 240351061 is the fresh food crisper drawer, and part# 240599301 is the frame for it, and both parts are in stock. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2361213
Manufacturer Part Number: 240350903
Brand
Model Number
Description
Kenmore
25344302400
Refrigerator
Kenmore
25344302401
Refrigerator
Kenmore
25344303400
Refrigerator
Kenmore
25344303401
Refrigerator
Kenmore
25344303402
Refrigerator
Kenmore
25344303403
Refrigerator
Kenmore
25344304400
Refrigerator
Kenmore
25344304401
Refrigerator
Kenmore
25344309400
Refrigerator
Kenmore
25344309401
Refrigerator
Kenmore
25344352400
Refrigerator
Kenmore
25344352401
Refrigerator
Kenmore
25344352403
Refrigerator
Kenmore
25344352404
Refrigerator
Kenmore
25344352405
Refrigerator
Kenmore
25344352406
Refrigerator
Kenmore
25344352407
Refrigerator
Kenmore
25344352408
Refrigerator
Kenmore
25344352409
Refrigerator
Kenmore
25344353400
Refrigerator
Kenmore
25344353401
Refrigerator
Kenmore
25344353402
Refrigerator
Kenmore
25344353403
Refrigerator
Kenmore
25344353404
Refrigerator
Kenmore
25344353405
Refrigerator
Kenmore
25344353406
Refrigerator
Kenmore
25344353407
Refrigerator
Kenmore
25344353408
Refrigerator
Kenmore
25344353409
Refrigerator
Kenmore
25344354400
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service