Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
None
Took top off and replaced bolt.
Other Parts Used:
Mike from HOPKINSVILLE, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
August 22, 2017
My washing machine has a water drip at the nut on the pulley at the bottom the drip starts when the machine is in the wash cycle and the water is pooling at the bottom of the machine. The best that i can tell is that it is coming down the inside of the shaft, what can be causing the leak? I looked at the bolt that holds the agitator down it is in need of replacing and the "o" rings look worn, would that cause the water to leak down the shaft to the bottom? Or is there another gasket or that needs to be replaced? That way i know if i need to order more parts. Thank you david
For model number WJRE5550K2WW
Hi David,
That is a good question. Some parts that you may have to investigate are the drain hose, the tub seal, the drain hose clip, the hose drain inlet, the water inlet valve and the drain pump. I hope this helps with the repair. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Edith
December 19, 2019
Does the rubber washer comes with this part; trying to self fix a leak.
For model number PS2355964
Good Day Edith. Thank you for your question in regards to PartSelect Number PS2355964. In order for us to assist you we will need you to provide us with your unit's model number so we can research to see into finding the right compatible parts. If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is appro...
The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace and should probably be installed by a qu...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2355964
Manufacturer Part Number: WH02X10284
