Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ernie L - March 20, 2023
Verified Purchase
Easy repair, very expensive though.
Microwave part will get us through until microwave is done. The plastic parts are very cheap and not designed to last in an over stove mount microwave. Btw, this is the second time after original microwave that we have had to replace because the part is plastic and does not withstand heat. I would have expected better of the brand Kitchen-aid.
★★★★★
★★★★★
Kevin H - May 26, 2022
Verified Purchase
Easy repair, good fit
The part had a slight manufacturing flaw in the top right corner but otherwise good.
★★★★★
★★★★★
Patricia B - April 17, 2022
Verified Purchase
Quick delivery easy part to install
Quick delivery easy part to install This part came within two or three days it was the correct part it was in great condition it took five minutes to install. Very happy
★★★★★
★★★★★
Alison M - March 27, 2022
Verified Purchase
Super quick delivery but pricey!!!
This is the second time this metal guard has broken off from above our microwave. Very happy with quick delivery but the item cost $180 for what is effectively just a strip if metal….
★★★★★
★★★★★
Thomas K - December 18, 2021
Verified Purchase
Easy Part Replacement/Install
The grill arrived with some slight damage, however contacting the part select help service was quite easy and painless. Once I sent some photo's showing the damage the refund process began. The only drawback to the process was I had to purchase a second grill vent before I actually got my refund which only took 4 days. The second grill arrived much sooner than I had thought and it came in perfect shape. Installation is very easy as it only requires two screws. I will purchase from them again. Thanks PartSelect.
★★★★★
★★★★★
Ken A - September 1, 2021
Verified Purchase
Easy repair
Part arrived a bit dented… but still usable
★★★★★
★★★★★
Colin J - May 20, 2020
Verified Purchase
Easy install
Worked as expected
★★★★★
★★★★★
Paul A - May 13, 2020
Verified Purchase
Easy Repair
The part was easy to install and looks great!
★★★★★
★★★★★
Geoffrey F - December 18, 2019
Verified Purchase
Easy Peasy
Went right on, screwed the two screws on, works well!
★★★★★
★★★★★
Scott S - March 18, 2019
Verified Purchase
Vent grille
The replacement part arrived in good shape and fit well
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 18 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Plastic part that held the screw in place broke...into many pieces
The repair was easy beyond my biggest imagination. It took longer to get the part of the box than it did to install it. Three scres and that was it! Less thatn 5 minutes to install.
I just find it questionable why so many of these vent covers have to be replaced.(I saw all of the reviews before I purchased the part. Sure seems like a lot of broken covers.) Why do they break so easily and why hasn't KitchenAide made them ar bit more durable.
Other Parts Used:
G. Vann from Ft. Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
48 of 49 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vent grille brackets were broken.
It's a good thing that the repair/replacement is easy, because this is the 3rd time that I have had to replace the vent grill. They are very cheaply constructed and KitchenAid should be ashamed to put a product this inferior on the market. Both the microwave and stove are a constant source of problems and repairs. I was amzed at the quick service and delivery. The vent grill was ordered on Monday and arrived Wednesday. GREAT SERVICE! Kitchen Aide should take notice.
Other Parts Used:
G. Vann from Ft. Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
23 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent above microwave fell off
It was so so easy. Took the two screws out, lined the new vent up with the holes, screwed the screws back in. Done!!!
Other Parts Used:
Margie from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The 2 molded plastic holes that accept the bolts broke.
A Phillips screwdriver was all that was needed. A poor design by KitchenAid for only having (2) bolts holding this stainless steel vent grille in a plastic housing, oh well. Don't lean or pull against it to hard or it will most likely break again.
Other Parts Used:
CAMERON from WILLIAMSBURG, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Grill-Vent fell off the top of the microwave
I just had to remove the screws, and the broken parts of the old grill vent (plastic part that sheared off) and put the new grill vent in place and use the existing screws to attach and that was it!
Super easy.
Other Parts Used:
Kelly from Playa Vista, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave grill vent broke off from face of appliance.
The replacement part was identical to that of the original microwave and arrived in perfect condition.
The repair was extremely simple - too screws and a "snap" and it was done.
Couldn't be happier with the results. Thanks, Part Select!
Other Parts Used:
CRAIG from ATASCADERO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vent bracket broke, that in which in the entire vent needed to be replaced.
Removed the three screws and replaced the with the new vent.
Other Parts Used:
Paul from Vero Beach, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grill vent was broken
All it took was 2 screws and it was done - could not have been simpler.
Other Parts Used:
Rick from Ormond Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic holders cracked causing the Vent Grill to completely separate from th Microwave.
Repair took kess than 5 munutes.. Align plastic guides for the Screws and using a Philips screwdriver commence to tightening same .
Other Parts Used:
Vince from LAHASKA, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy fix
The part is held in place with two screws. A poor design for sure. The replacement part is a direct fit once the two screws are removed. Reuse the same screws, don't order new ones.
Other Parts Used:
Hild, from STRONGSVILLE, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy Smith
August 4, 2017
Can you please give me the dimensions for the vent grille for a microwave? Thanks, kathy
For model number W10250593
Hi Kathy,
Thank you for the inquiry. This part is approximately 30" x 3.5". I hope that helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
February 3, 2020
Can the black plastic insert be purchased separately for the top exhaust trim piece?
For model number Ykhms1850ss
Hello ,Thank you for your question. Unfortunately the grille is not sold separate it is all one piece. However the black grille is not being sold any longer and we cannot get it, I apologize. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
