SWITCH

Shipping was very fast. The part I received was a newer version of the switch. It required a spacer (that was included), but even with that longer shaft on the switch caused the dial to protrude out of the panel much further than the other dials. I had to use some small spacers to make it fit properly. Some instructions would have been appreciated. I‘m still happy with my purchase as I estimate I saved about $200.00 + by not having to pay to have it serviced.If you’re not Andy with things like this it could potentially be a challenge.

My appliance is back in duty !!!

The Electrolux/Frigidaire Switch PN 903136-9030 is a good replacement for the Kenmore Switch. There is no schematic so you must be careful not to connect the terminal wires incorrectly. The terminal locations are different and the numbers are hard to read. Double check the terminal connections to be sure.

La pièce étais parfaitement correcte et la réparation a été facile à faire . Merci

One of the part bags was open and 1 screw was missing. Please check that the bags are sealed and all pieces are accounted for.

Parts were fine except one packsge was lacking a screw. Needed to call a local appliance supplier to help me match up 5 wires with the correct posts. A diagram for the whole arrangement would have been helpful. Everything is working great now. Your order desk personel was very helpful! Thank you very much.

Ordered 2 of same part but one was different packaging & has proved to be useless on low & simmer. Also, very much slower to cook on even at high heat.