AP2008205, 243356, 102428, 102430, 295849, 299424, 311484, 325666, 331484, 4327611, 4331106, 4342686, 8004667, 8004686, 8004745, 8004767, WB01X1130, WB01X1135, WB01X1175, WB01X1253
...
Show more
, WB01X1294, WB1X1135, WB1X1175, WB1X1253, WB1X1294
Show less
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
GE WB44T10086 Range Convection Element AP4358533 PS2321875 interrupted
after you disconnect the direct breakers and open the oven: 1. remove the first 4 screws and the fan's cover 2. remove the short screws from element convection assembly 3. gently pool both wires and disconnect the old element (two terminals) 4. carefully insert the terminals in the new element. 5. re-screw the short 4 screws (better to buy new ones with the assembly) They are available but sold separated. 6. fix back the fan cover, re-connect the breakers and that's it!
Old broil element started burning with being on OFF position requiring need to turn off breaker and cut element in two to stop progression of burn
1. Turn breaker off at breaker box. 2.Disconnect old broil element. Pull electric wires out 3-4 inches from BACK of oven. Clamp wires or tie off so they do not retreat behind back oven wall. INSTALL wires to new element and secure back plate. Install NEW clamps to new element. Switch on breaker and check operation.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ivan
December 11, 2017
My socket wrenches are unable to bite on the screws holding the backplate covering fan so as to replace the broiler element. The hex heads appear very shallow, preventing socket wrenches from gripping the screws. Special wrench? Find different sockets?
For model number JKP56WD1WW
Hi Ivan, Thank you for the question. You should not have to remove the Fan to replace the element. You can remove the element from the front of the appliance. Just remove the screws that hold the back bracket in place and the brackets that hold the element up to the top of the oven. Pull the element out to expose the wires connected to the element terminals. I suggest getting a clothes pin to hold the wires so they do not fall back into the hole. Reconnect the wires and the screws and you are set.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS234427
Manufacturer Part Number: WB1X1130