This door hinge can be used for the left or right side. Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB10K12 replaces these:
AP2020147, 244485, WB10K0012
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
August 23, 2017
Oven door hinge has a swivel lock position. Looking down on hinge from top which way should it be? I removed the door and it was in lock position. When i put the door back in place it want go far enough down to close door. GE gas. Your help would be appreciated..
For model number JGB620REF1SS Serial# SA235620P
Hi Bill,
Thank you for your inquiry. When the latch is out (Front to Back in direction) that means that it is in the lock position. When that latch is in (Right to Left) that means that it is in the open position. Try pressing the cancel button and holding it for 30 seconds to see if that disengages the lock. Your problem right now is that your lock is in the lock position and if you try to shut your door, the latch is going to stop it from closing all the way. If pressing the cancel button does not work, try unplugging the appliance for 5 minutes and then reconnecting it. Sometimes that will reset the latch and it will go back into the unlocked position. If that does not work you may have to replace your door latch. You should test it with a multi-meter to determine whether or not it is malfunctioning. Good luck.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gerry
November 16, 2019
I need to replace the oven door hinge on the left side (facing front of oven) . I can remove the door but am not sure how to get to the hinge spring since i have a lower warming drawer. Do i need to get at it by removing the side panel? If so, are there instructions on how to do that?
For model number P2B918SEM3S
Hi Gerry, thank you for your question. To remove this part you have to remove the warming drawer entirely by pulling it out and away. There is a small panel on the inner cavity of where your warming drawer goes. You would have to unscrew that panel to access the door spring. Make sure to mark the hole that the spring is attached to. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS230758
Manufacturer Part Number: WB10K12