Spark Module

Hi Ed, Thank you for your question. If the lower oven will not heat, you will need to check the bake igniter and the temperature sensor to see which part is causing the issue. I hope this helps. Thank you and have a great day!

Hi Steve, Thank you for your inquiry. With an issue like that, I would suggest taking a look at this part (your spark module) and the spark ignitor switches as well. You should test both parts to see if they are malfunctioning. I hope this helps. Good luck with your repair.

Hi Steve, Thank you for the question. Normally when none of the top burners spark you will need to replace the Spark Module. Hope this helps!

Hello Gary, Thank you for the question. You will need to remove the back panel of the appliance and it is normally at the back right corner just behind the panel. Hope this helps!

Hello Scott, Thank you for the question. We suggest testing the Igniter. A weak igniter will still glow but not have enough power to open the valve and light the gas. The oven ignitor should have a resistance reading of 3.2 to 3.6 ohms. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Douglas, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.