![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Blower Motor
Fits your 2490!
$464.07
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 2490!
PartSelect Number
PS2076843
Manufacturer Part Number
707704K
Manufactured by
Whirlpool
Product Description
Blower Motor Specifications
This part is used with down-draft models. It helps draw the steam and odors through the vent when the fan switch is activated.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Cooktop, Range.
This part works with the following products:
Jenn-Air, Kenmore, Hoover.
Part# 707704K replaces these:
AP4089728, 1676, 707704K, 7-7704, 707704, 707704K, W10116772, Y707704
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
blower motor died
Pulled the motor and blower wheel from below. Replaced both. I think it was easier to replace the two together than just the motor.I also had old light indicators so we replaced them since the stove was sort of apart. The repair was not difficult at all, and my 30+ stove top looks and runs great!
Other Parts Used:
-
Janellen from Aiken, SC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
35 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor bearing failure after 34 years.
Important: Down load the helpful assembly diagram for the fan motor and study it for a few minutes. It's very straight forward. Also a good idea is to remove the bottom panel which comes off easy before starting.
My only problem was removing the existing blower/fan wheel without damaging it once I had the assembly on the work bench. It was rusted on tight and managed to remove after a few tries using penetrating oil. The wheel is in stock and I'd suggest buying a new one along with the new motor if I had to do the job again.
Bottom line; the fan motor fit perfect but did have to re-use part of the old existing electric pig tail because the motor does not come with the factory type motor terminal connectors. By using three twist on wire connectors was back in business. The down draft vent works like new.
Wife is happy...
Wade
My only problem was removing the existing blower/fan wheel without damaging it once I had the assembly on the work bench. It was rusted on tight and managed to remove after a few tries using penetrating oil. The wheel is in stock and I'd suggest buying a new one along with the new motor if I had to do the job again.
Bottom line; the fan motor fit perfect but did have to re-use part of the old existing electric pig tail because the motor does not come with the factory type motor terminal connectors. By using three twist on wire connectors was back in business. The down draft vent works like new.
Wife is happy...
Wade
Other Parts Used:
-
Wade from CARMINE, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
May 8, 2018
Motor runs off and on. Does this usually mean the motor is about shot ? If so, how do i remove the motor from the plenum > thanks for your help !
For model number C201
Hello Richard, thank you for your question. If the fan motor is turned on, and starts and stops when engaged the issue is either the switch for the fan or the motor. The switch can be tested with a multimeter to determine if it is the problem. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frances
August 2, 2019
Am concerned because of the number changes in the part that i have saved in the cart. I need to be sure that it will work with the model number of stove that i have.
For model number PS 207 6843
Hello Frances, thank you for writing. We would be happy to look into this, but we will need the model number for your stove to do so. We look forward to hearing back from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robin
May 30, 2022
JES9860CAB01. Hi there fan switch goes on it has power but the fan for the downdraft does not work? What do I need to purchase for parts or is the problem?
For model number JES9860CAB01
Hi Robin,
Thank you for your question. If the fan switch has power and the blower motor is not working, then it may be malfunctioning and you will need to replace it. The part number listed under your model number for the blower motor is PS11750204. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2076843
Manufacturer Part Number: 707704K
Manufacturer Part Number: 707704K
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)