Average Repair Rating: 2.5 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Jammed gas valve , bad fan switch, and corroded ignitors
Turned off the gas valve and disconected the gas line from the stove-top. Removed the stove top and disassembled the unit, to access the bad parts. While unit was disassembled we cleaned the parts which were to be reused and applied the new parts. The unit was then reassembled and reinstalled. The replacement of the gas valve required only a 1/2" wrench and screw driver, while the replacement of the ignitors required the use of an adjustable wrench. The ignitors are connected via spade connectors to an electrical device located in the electrical box at the lower center portion of the unit. Not a hard job but slightly time consuming.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
March 1, 2019
The right front burner does not immediately ignite when you turn it on. It will eventually ignite but causes a flair up. The back right burner works well. Is this the igniter or something else?
For model number CVG4280B
Hi Ed, thank you for your question. You may want to take a look at your valve for being clogged however it might be your igniter switch that is the issue. I would suggest checking the switch for the specific burner that is not working there. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gray
January 17, 2019
I have a front left gas valve the will not turn. I was told the part number is wp704505. I see by another entry here that you said that is the right valve part number. What is the correct part number that i need?
For model number CG206B
Hello Gray, thank you for your question. The right side valve is part number PartSelect Number PS2076683 for this unit. The left side valve is PartSelect Number: PS2076684 but this part is no longer available by the manufacturer. I hope this helps!
Was this helpful?
Thank you for voting!
Patrick
February 26, 2018
I have a stickey valve on the right side i was told part wpy04100188. I see there may be a difference like left or right side for the burners on the left or right side. My bad valve feeds the front right burner what be the part i need?
For model number CG206S
Hello Patrick, thank you for your question. There are only two valves for this unit, the two that control the left side and the two that control the right side. To replace the bad valve you would order part number 704504K which would work for the front right or back right burner. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.