The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides added protection for the compressor motor because it protects against excessive current and excessive temperature use
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric.
Part# WR07X10097 replaces these:
AP4300623, 1265640
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clay
January 28, 2019
My freezer temperature has been rising a couple times a day to as high as 22-25 degrees f but eventually goes back to 0 degrees. I had a tech come look at it and said he thought it could be the start relay. Does this sound accurate? I didn't want to replace it unless i could say with more certainty that would actually fix the problem. Thank you.
For model number PFS22SISBSS
Hi Clay,
Thank you for your question. This part is one of the parts that is listed that would fix this issue. Some other parts that fix this issue as well are the temperature sensor, the electronic control board and the run capacitor. If the technician has determined that the start relay is the part you need, then it should be the correct part. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Steven
June 3, 2019
Where is the part number located on the starter/overload device? There is several different numbers on this and i don't know which one is the correct one.
For model number PFS22SISASS
Hello Steven, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS1766101. Part number is normally on a white sticker. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Henry
February 27, 2018
My refrigerator's compressor seems to want to kick on, but doesn't. It tries to start about every minute or so and shuts off after a second. If I put my hear close to the overload/relay, I can hear it click every few seconds. I had a service tech look at it, but it wasn't doing it when he was here. I had unplugged the refrigerator for over 24 hours before he arrived. He plugged in the refrigerator and after a few minutes it started running again. He seem to think it is a circuit board, but he said he can't be sure. I tend to think it's the overload/relay. Can you help diagnose the problem?
For model number PFS22MISBWW
Hi Henry, Thank you for the question.I would first test the Overload. It should read close to 5-6 ohms. You can also shake it to see if there is a rattle, if you hear a rattle it is defective. If the Overload is good you may have a defective control Board. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steven
June 3, 2019
The start/overload device on mine is a 51364020, is this part # wr07x10097 compatible?
For model number PFS22SISASS
Hello Steven, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1766101. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
