The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. Over time, these rollers can become worn, and it may cause your dryer to be noisy during operation. The bearing inside this roller is self-lubricating, so no grease will be required.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Maria P - September 8, 2020
Verified Purchase
Great Part saved us money
our dryer was making a very loud noise. lucily my husband is handy and took the dryer apart and discoveted the front roller was flat. it was surprising given the dryer was only 5 years old. we ordered the part and replaced it and are happy to report the dryer is working like charm. thanks to Partselect.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer making a thumping and squealing noise when running
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
Other Parts Used:
Mark from WAVERLY, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
69 of 83 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very noisy when running
We bought 2 roller wheels to replace the ones up front that turn the drum. We watched a video prior to ordering the parts, then followed along with it as we did the repair. It was really easy to complete, with the hardest part being getting some of the screws to loosen at first. Now it purrs like a kitten. We are so happy to have silences the racket. One wheel was completely worn away, with shreds of rubber sitting inside the cabinet.
Other Parts Used:
CAROLYN from LEBANON, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy when drying. A bumping noise
Watched the video a couple of times. After that it was a breeze.
I followed the video instructions that were supply on your site
Other Parts Used:
STEPHEN from EAST TAWAS, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud thumping when dryer was turned on
Completly disassembled dryer removed 2 rear rollers installed 2 new rollers. Reassemble dryer in including new drum belt. Dryer is nice and quiet again running fantastic, thank you for your support
One of the roller assembly froze up & had a flat spot on it. There for causing the drum not to rotate. Pulled it out replaced the roller & up & running.
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
PATRICK
September 16, 2022
How many roller are included in this kit
Fits your DLEX3570V Dryer!
PartSelect Number PS16763594
For model number DLEX3570V
Hi Patrick,
Thank you for your question. This kit contains one one roller and tri-ring. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
10 people found this helpful.
Was this helpful?
Thank you for voting!
David
May 5, 2023
Does this LG dryer have a rebuild kit? The one that has the belt, drum rollers and motor belt roller.
For model number dlgx2802w
Hi David, Thank you for the question. The Parts for this model are not sold as a repair kit, just individually. We hope this helps!
My dryer's roller wheel, or wheels, are grinding. I found some off-brand ones for $30 per set of 4. Is one of these wheels from you $85 or is that for a set of four?
For model number LG DLEX3570V
Hello Geiger, thank you for asking. This kit contains one roller and one tri-ring. good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
June 20, 2023
Does this item PartSelect Number PS16763594
Manufacturer Part Number AGM75510755
Manufactured by LG
is for a set of 2 rollers? It is not clear on the website.
Thank you
For model number LG DLE5977W
Hi James, thank you for reaching out. This part is sold individually. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sarah
February 25, 2023
Dome light comes on when door opened, dryer doesn"t start
For model number DLE2301W
Hello Sarah, thank you for getting in touch. Based on our research, you need to check the door, and confirm that the door is fully closed. The dryer will not start with the door open. Remove anything that is obstructing the door. The door switch, part number PS3529308, activates when the dryer door is closed. On most dryers, the door switch makes an audible clicking sound when it activates. To determine if the door switch is working, try starting your dryer and then listen for the “click.” If the door switch makes a clicking sound, it is probably not defective. If you don’t hear a click, use a multimeter to check the door switch for continuity. If the switch does not have continuity, replace it. On most dryers, when the dryer belt breaks, the motor will still run, but the drum will not turn. Check the dryer belt, if the belt is broken, you may need to replace it with part number PS11705916. If the problem persists, we would recommend replacing the motor, part number PS3523290, to fix the issue. We hope this helps, good luck with this repair!
