Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
F6 E1 Error on Display. Oven overheats; broiler element is on constantly in BAKE mode.
Repair is fairly easy. Turn off power source or unplug the range. Pull the range out to access the rear sheet metal panels; there's two of them, large upper and smaller lower one (that covers the A/C power connections). Remove the two screws in the bottom panel first and put it aside. Before removing the screws on the upper panel, take note of how the top vertical edge of the panel "tabs" are inserted underneath the stationary top of the range. Remove either five or six screws on each side of the panel and put it aside. Now the rear of the control board is accessible. All of its connectors are color-coded, although its best to shoot a pic of it before removing them. After removing all of the connectors, there's one mounting screw on each side of the board; remove them and pull out the board. Now, install the new control board, making sure all of the connectors are properly secured. Restore power to the range; make sure the problem is resolved (before reinstalling the rear panels) by entering the BAKE mode. Pre(heat) cycle begins to default 350-deg temp; should take 8-9 mins from a cold oven to reach 350-deg. If it passes the test, shut off power and reinstall rear panels beginning with the UPPER one, paying attention to the "tabs." Then install the lower panel, reapply power, slide the range back into its home base making sure the anti-tip bracket is properly engaged. That's it.
Other Parts Used:
RICK from LA PLATA, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 13, 2021
Control Board (W11567368), is this the proper control board for serial number-RX3931290 ?
For model number WFE505W0HB2
Hello John, Thank you for your inquiry. We have researched the model number you have provided and show that this is the black control board for your model. If you need the white control board, the part number is PS16620242. We hope this helps.
When baking oven changes from bake to Broil causing error.
For model number WFE505WOHWO
Hi Theron, thank you for reaching out. According to our research on your model, the most common cause is the Electronic Control Board, part number PS16660475. The electronic control board monitors the temperature and controls the oven heat. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
March 8, 2022
All I need is 2 light bulbs to fit my Whirlpool refrigerator/freezer. So far I’ve spent $30 on light bulbs that are too big. I need 2 LED bulbs, part # W10565137(3.6 watts).
Can you help me?
For model number WRB322DMBM00
Hello Donna, Thank you for your inquiry. We have researched the model number you have provided and show the correct LED bulbs for your model as part# PS12717432. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
What part number do I order for the light bulb in the deli drawer and how do I replace it?
For model number WRX735SDHZ00
Hello Pat, thank you for your question. The correct part is a Light Switch PS12584655. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
need freezer replacement light bulb-looks like it costs $378-can this possibly be correct?
For model number wrf535smbm
Hello Robyn, Thank you for your inquiry. We have researched the model number you provided and the correct part number for the freezer light bulb is PS12717432. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
MY Oven stopped heating a few week ago, then several days ago the stove top stopped working as well
For model number WFE505W0JS50
Hello Reynolds, thank you for your inquiry. The first thing to check is a blown fuse or the safety thermostat PartSelect Number PS11740991. If those do not correct the issues, then we suggest the electronic control board. Good luck and have a great day.
Looking for a control board for my whirlpool oven can you please let me know if you have the part in stock and also what is your warranty policy? Thank you.
For model number WFE505W0HS0
Hi Al, thank you for writing in. We do have the correct Control Board in stock. Our Warranty period is 1 year on uninstalled parts. We hope this helps.
Was this helpful?
Thank you for voting!
Karen
December 6, 2021
Need replacement bulb for refrigerator. What part number do we need?
For model number WRF555SDFZ04
Hi Karen,
Thank you for your question. The part number listed under your model number for the light bulb is PS12717432. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
