Part Location Diagram of 6501KW2002B LG SENSOR ASSEMBLY
See part K351 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

SENSOR ASSEMBLY

 Fits your WM2077CW!
★★★★★
★★★★★
10 Reviews
$64.33
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WM2077CW!
PartSelect Number PS16556422
Manufacturer Part Number 6501KW2002B
Manufactured by LG
Product Description

SENSOR ASSEMBLY Specifications

This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. If your washer pumps but will not spin or agitate, you may have a damaged sensor assembly. This part is sold individually, and is an OEM part sourced directly from the manufacturer. Be sure to shut off the power to your washer before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Will Not Start | Spins slowly
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 6501KW2002B replaces these:
6501KW2002A
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 7 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Other Parts Used:
  • Mark from Harrisburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
232 of 303 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LE fail code
Removed back of washer with screw driver, Removed outer motor cover with a 17 mm socket (1 bolt), Removed motor stater using 10 mm socket (8 bolts). Left motor plugged in and and tipped to the side exposing the sensor. Unplug and snap off sensor. Reassembled in opposite order. Machine works great. Very easy fix, and perfect fit on part.
Other Parts Used:
  • scott from GODDARD, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
23 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
"Le" Fail Code on digital display ... Washer would not agitate and made an odd noise.
I first thought there was a mechanical problem but after checking everything mechanical I discounted that idea ... I researched and found out from others with a similar problem that the Le code display was probably a sensor problem ... I ordered a replacement sensor ... With the new sensor available, I removed the access panel to the back of the machine (phillips head screw driver - 4 screws) ... Remove the exposed motor half (1 bolt - 17mm scocket) ... Loosen the motor stator that has the wired coils (10mm socket - 6 bolts) ... Hold motor unit to the side without disconnecting the wiring harness ... Disconnect the sensor wire connector and remove the old sensor ... Clip the new sensor in place (same position as the old one) and re-connect ... Reverse the assembly procedures ... This fixed the problem and the washing machine works like a new one ... The wife is HAPPY!
Other Parts Used:
  • Ronny from GASTONIA, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Code LE
Disconnected power supply and water supply hoses. Laid machine on its back because this is a top load machine. Removed one bolt to take off stator then 6 bolts to remove rotor. Put it on side without taking off wire assembly. Snapped off rotor position sensor and installed new one. Put all back together and connected power supply and new stainless braided hoses. WORKS PERFECT. Thanks !
Other Parts Used:
  • Ronald from BELLE CHASSE, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Kept getting an LE code and washer would stop.
Disconnect elec., hot and cold water supply and drain hose. Lay washer on it's back. Removed nut from center housing. Removed screws from stater. Disconnected wires with flat screw driver at sensor and stater. Installes new sensor. Put everything back together. Washer works great. No LE code.
Other Parts Used:
  • Chris from NEW CUMBERLND, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer drum would not spin around completely. It would just jerk and try to spin. Error code LE showed up.
We followed the installation video step by step that was found on another website.
Other Parts Used:
  • Brenda from BROWNSVILLE, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not spin le code
bought a position sensor
top load machine when i tipped the machine over i found
the nut and washer on the floor .replaced the sensor and nut
took about half an hour
Other Parts Used:
  • gregory from TEWKSBURY, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lina
September 23, 2023
What i should do o change for a LG washer "de" Error code
For model number WM3470HVA
PartSelect logo
Hi Lina, thank you for your inquiry. According to our research, the "dE" error code on your LG washer indicates that the washer door was unable to lock. To fix this error code, we would recommend to turn the machine off by pressing the power button and unplug your machine and restart it again. Next, press and hold the Start/Pause button for 5 seconds. If that does not work, you may need to check the door lock assembly, part number PS3533609, to help fix this issue. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Matthew
April 12, 2023
Please confirm this is the hall stator assembly for my model washing machine.
For model number WM3170CW
PartSelect logo
Hello Matthew, Thank you for the question. The Sensor for this model is only sold as part of the Washer Motor Stator. The Sensor is not sold on its own. We hope this helps, good luck with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
Randy
April 18, 2023
When coming to the spin cycle, the washer stops and displays the LE code. I’ve tried the “unplug/press and hold start button/replug” reset but still persists. I’ve been able to finish the spin cycle by restarting and running on speed cycle setting. My research diagnosis would tell me that it’s the Hall sensor at fault. Is this likely correct ? And if so, which part should I be ordering? Thanks!
For model number WM2701H
PartSelect logo
Hi Randy, thank you for reaching out. An LE error code indicates that the motor is locked, possibly due to a heavy wash load. Since you have already reset the washer, we recommend checking to replace the rotor position sensor switch, part number PS16556422. We hope this solves your issue!

Was this helpful?
Thank you for voting!
Denise
May 4, 2023
Will part #6501kw2002a changed to #6501kw2002B fit my front load lg washer.
For model number WM3370HWA
PartSelect logo
Hello Denise, thank you for the query. According to our research, the sensor assembly does not come separately. You may need to buy the stator assembly, part number PS3635512. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Jim
March 23, 2023
Unit does not power on, CB checked, power at the receptacle
For model number WM377OHWA
PartSelect logo
Hello Jim, thank you for contacting us. Based on the description that you have provided, we would recommend checking the noise filter, part number PS11710201, and the power cord, part number PS12079896. If the issue still occurs, you may need to check the display board, part number PS12080523. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16556422
Manufacturer Part Number: 6501KW2002B
Brand
Model Number
Description
LG
29272
Washer - LG Washing Machine Model 29272 Parts
LG
29278
Washer - LG Washing Machine Model 29278 Parts
LG
29472
Washer - LG Washing Machine Model 29472 Parts
LG
29478
Washer - LG Washing Machine Model 29478 Parts
LG
31522
Washer - LG Washing Machine Model 31522 Parts
LG
31523
Washer - LG Washing Machine Model 31523 Parts
LG
35452
Washer Dryer Combo - Washer-Dryer
LG
35563
Washer Dryer Combo - Washer-Dryer
LG
40272
Washer - LG Washing Machine Model 40272 Parts
LG
40311
Washer - Washer
LG
40318
Washer - LG Washing Machine Model 40318 Parts
LG
40441
Washer - LG Washing Machine Model 40441 Parts
LG
40448
Washer - LG Washing Machine Model 40448 Parts
LG
40512
Washer - LG Washing Machine Model 40512 Parts
LG
40518
Washer - LG Washing Machine Model 40518 Parts
LG
41022
Washer - LG Washing Machine Model 41022 Parts
LG
41028
Washer - LG Washing Machine Model 41028 Parts
LG
41029
Washer - LG Washing Machine Model 41029 Parts
LG
41072
Washer - LG Washing Machine Model 41072 Parts
LG
41073
Washer - LG Washing Machine Model 41073 Parts
LG
41172
Washer - LG Washing Machine Model 41172 Parts
LG
41182
Washer - LG Washing Machine Model 41182 Parts
LG
41272
Washer - LG Washing Machine Model 41272 Parts
LG
41282
Washer - LG Washing Machine Model 41282 Parts
LG
41283
Washer - LG Washing Machine Model 41283 Parts
LG
41372
Washer - LG Washing Machine Model 41372 Parts
LG
41379
Washer - LG Washing Machine Model 41379 Parts
LG
41532
Washer - LG Washing Machine Model 41532 Parts
LG
41538
Washer - LG Washing Machine Model 41538 Parts
LG
41542
Washer - LG Washing Machine Model 41542 Parts
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service