Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker removal
Once the screws were removed from the bottom of the ice maker, the unit had to be removed forcefully because of the limited clearance and the support tray under it. The next difficulty was to disconnect the old wiring harness so that the new unit could be installed. Having completed this, the install was fairly easy and the job was completed successfully. By changing the supply valve, filter and ice maker all the problems were removed and the unit is working properly.
Replaced the entire unit. 1. Unplug refrigerator 2. Remove ice maker door. 3. Remove the 1/4 inch screw on bottom holding it in. 4. Release tab on bottom left 5. Slide ice maker back 6. Unplug electrical connector. 7. Installation is reverse of these instructions.
Other Parts Used:
Matthew from BELLEVUE, NE
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dewayne
January 31, 2022
Does a replacement icemaker assembly include replace emitter boards?
For model number KSRJ25FXMS03
Hello Dewayne, Thank you for the question. The Emitter and Receiver Boards are not included with the Ice Maker, they are sold separately. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Does this part PS16543407 (fridge icemaker) fit in Kenmore model 106.53652300?
I assume the photo of this icemaker means all components seen in the visual are included (i.e. the harness, motor, mold, heater, etc); is this correct?
For model number 106.53652300
Hi Allen,
Thank you for your question. This would not be the correct ice maker for your refrigerator. The part number for the ice maker is PS869316. We hope this helps!