Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Patricia P - 28 days ago
Verified Purchase
Great part and Easy repair - dishwasher back working again
The parts arrived quickly and in good condition. With a little help from Youtube, we had the part in and the diswasher working again. I wish that I had done this sooner! No need to be afraid of doing it myself.
★★★★★
★★★★★
Stacy U - August 23, 2024
Verified Purchase
Easy repair!
This part was exactly what I needed, replacing it was easy and my dishwasher door is closing perfectly once again!
★★★★★
★★★★★
Jairo T - July 17, 2024
Verified Purchase
Worked!
Good parts and service.
★★★★★
★★★★★
YVAN B - May 17, 2024
Verified Purchase
Perfect match
Exactly as described. Easy to intall, perfect fit and works well.
★★★★★
★★★★★
Debbie M - February 6, 2024
Verified Purchase
Worked as expected
The part was exactly what we needed. The site was easy to use and of great assistance. We'll designed. Customer comments reviewed was also very helpful.
★★★★★
★★★★★
Kade-Ann H - January 2, 2024
Verified Purchase
Easy repair
Great description and details.
★★★★★
★★★★★
Mike F - November 8, 2023
Verified Purchase
Part seemed to work great
The issue was the dishwasher stopping mid cycle, as if someone pulled it open. Replacing this part, it completes the cycle every time
★★★★★
★★★★★
Glenn R - October 13, 2023
Verified Purchase
Easy repair
Part worked as expected. So far so good
★★★★★
★★★★★
Elizabeth W - September 26, 2023
Verified Purchase
Easy Repair
Customer service was very helpful. Delivery was super quick. Easy to install. No issues. The part was also lower than anywhere else we could find (other than Amazon, but do you really know what you're getting when ordering there?). Will order from here again if needed.
★★★★★
★★★★★
Ed M - August 26, 2023
Verified Purchase
broken latch
The part accompanied by the instructions worked perfectly
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Appliance read out "err", would not go on
It would sometimes work, which led me to believe it was a switch. Looked on line and found the mail switch to go on was in the latch. I took it apart, 6 screws, wiggled the switch and it went on. So I found the door switch to be bad. It was very simple to change the switch.
Other Parts Used:
Rick from Ozark, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
38 of 71 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch assembly broken, Dw will not shut off upon door opening.
Remove Phillips head screws on inner part of door panel. Pull door cover up and remove face panel. Remove torx head screws from inner side of door and remove control panel. Remove two torx screws retaining door latch mechanism. Remove and replace two wiring harnesses from old latch to new latch noting polarity. I tall new latch using two original torx screws. Replace control panel and cover in reverse order. Test door latch function under any cycle. Washer should start with door closed and stop when opened
Other Parts Used:
Brian from NEW FAIRFIELD, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door switch would not engage properly
Removed 6 screws from door front panel. Removed two wiring connectors and screws fromdoor latch Replaced and all is great
Other Parts Used:
carol from CHAPEL HILL, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Son ripped open dishwasher while running and wouldn't close
Replace the latch. Got to cut off old latch, trim wires, install latch, and put on the dishwasher door cover back on with screws
Other Parts Used:
DANIEL from BRADENTON, FL
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not latch
Removed 6 torx headed screw (loosens the internal control panel) and 2 philips headed screws(allows for front door panel removal). 2 torx screws had to be removed from existing latch along with 2 plugs loosened, be aware of how the plugs were connected to the latch. Do the reverse; attach plugs to new latch and reattach latch with the 2 torx headed screws. The 6 torx screws reattach the control panel and the 2 philips screws reattach the front door panel (be sure the front door panel is properly aligned prior to installation of the philips screws).
Other Parts Used:
Gary from LITTLETON, CO
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch would not latch, would not power on due to this
Seriously very easy. Took screws from side of door on inside of washer, silver cover plate came off and was simple to replace the latch using torque screwdriver and phillips screwdriver.
Other Parts Used:
David from EASTPOINTE, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water did not drain. Found the door latch broken
Unplug dishwasher. Open the door. Remove two Phillips head screws holding the door panel on. Slide door panel down and out to remove. With door still open, remove the six T20 torque screws that hold the control panel. Behind the control is the latch assembly. Take a picture of the wires going into the latch assembly for installation reference(mine was black wires on left and white wires on right). Unplug the two sets of wires. Remove two T20 torque screws that hold the latch. Replace with new latch and reverse steps for installation.
Other Parts Used:
Casey from Keota, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
.Latch broke
Latch broke. and it wouldn't run without locking. As a trucker's wife it's up to me to fix whatever breaks or do without. I took apart the door, noticed the model number, and ordered the part. it was easy., it was harder to go thru Thanksgiving and wash dishes by hand.
Other Parts Used:
Adrienne from LAKE ALFRED, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door wasn’t locking
You tube video and it was so easy less than 20min had it fix
Other Parts Used:
Michael from FAIRHAVEN, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch was bad
Just take the door apart remove the latch
Other Parts Used:
Jeff from TIOGA, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ROGER
February 20, 2023
My dishwasher will not light up or start after it is closed
For model number LFID2426TF5A
Hi Roger, thank you for your inquiry. First, you need to check the door latch, part number PS16218716, because the door latch makes sure that the door is securely shut. When it malfunctions, your dishwasher won’t work properly. If it is fine, then you may need to check the dishwasher user interface control button assembly, part number PS12585991. We hope this sorts out your problem!
Hi Brenda, thank you for reaching out. The Er code means that the touch control panel is shorting out on the dishwasher. We would suggest checking the wire harness first. If it is fine, the issue could be with the user control and display board, part number PS12585690. You may need to replace it to fix the issue. We hope this solves your problem!
Hello Billie, thank you for reaching out. The error code CD means that the dishwasher does not think the door is shut. If you have opened and closed the door firmly and you still get the error, your door latch assembly, part number PS16218716, needs to be replaced. There are switches built into the latch and they are not sending a good signal to the main control board to tell it that the door is shut, so even if the door is closing properly, the dishwasher will not run. We hope this information helps!
Was this helpful?
Thank you for voting!
Raul
May 12, 2024
Door Lach do not release when the cycle ends
For model number FGID2466QF6A
Hello Raul, thank you for your inquiry. According to our understanding, the issue is most probably with the door latch, part number PS16218716. You may need to replace it to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Anthony
September 3, 2022
The connector s that where connected to door latch look burned up how do I fix this
For model number FFID2426TD0A
Hello Anthony, Thank you for your inquiry. The connectors would be part of the wiring harness PS11703843. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16218716
Manufacturer Part Number: 5304525218
