Maytag/Maytag_Thumb/BMNFZN05.gif
See part 8 in the diagram
Replacing your Kenmore Dryer Leveling Foot play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Leveling Foot

★★★★★
★★★★★
5 Reviews
$9.09   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1609293
Manufacturer Part Number 49621
Manufactured by Whirlpool
Product Description

Leveling Foot Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# 49621 replaces these:
AP4295805, 1373044, 2012, 26000688222, 279810, 3392100, 3392100D, 3399694, 40021, 4319350, 49591, 49621, 49621VP, 688222, 8221
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Ken
    August 23, 2017
    How many leveling feet does a wed6400sw1 have? Two or four?I bought it used and it has no front feet ..i didn't look at the back and i want to order them. is the back feet different?thanks!
    For model number whirlpool dryer wed6400sw1
    Hi Ken, Thank you for your inquiry. Your appliance will need 4 legs. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Phillip
    January 31, 2018
    How high are the leveling legs?
    For model number WGD7300DW2
    Hi Philip, Thank you for your question. From what I am seeing in the photo we have for this part on our site, this particular leg is approximately 1.5 inches long. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Nathan
    May 7, 2018
    Will these feet work with my dryer? I purchased the dryer used and it came with the drawers. I removed the drawer, and it does not have feet on the bottom. How many feet does my dryer need? Thanks.
    For model number WED95HEXL1
    Hello Nathan, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS1609293. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    John
    March 8, 2019
    How many leveling feet are in a order. One each or four? I also bought my dryer used and did not receive the feet.
    For model number AED4370TQ0
    Hello John, thank you for your question. The leveling feet are sold individually so there is on in each package. If you did not receive the feet with the new appliance, contact the store it was purchased and speak with them before ordering through us.

    Was this helpful?
    Thank you for voting!
    James
    May 6, 2019
    If you are using a pedestal under this dryer, do you need the leveling feet?
    For model number WED7500GW0
    Hi James, thank you for your question. Generally yes. Most of the time what you are supposed to do is screw in the feet as far as they can go so that they are flush with the washing machine. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Steve
    June 5, 2019
    If I place this model gas dryer on the level floor next to the washing machine, do I need to have the 4 leveling feet inserted into the gas dryer?
    For model number WGD8410SW0
    Hi Steve, Thank you for your question. To make sure the dryer is level, you will need all 4 feet. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Kathleen Millett
    July 1, 2019
    Dryer over heats on all settings. Even when “ no heat” is selected
    For model number 110.66972500
    Hi Kathleen, Thank you for your question. If the dryer gets too hot on all settings, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal fuse, the internal bias thermostat, the thermal cut-off, the high limit thermostat, the heating element and the heating element connection wire. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Chris
    September 16, 2019
    One leg of the dryer appears to be installed using counter clockwise leg. The frame does not look bent at all. Three people looked at it and it looks formed that way - with the thread backwards to the other three. Is one of the legs actually different? Can i order a reverse threaded foot?
    For model number YWED4915EW1
    Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11770254 and all appear to be the same thread. They are also sold as a set of 4. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your Kenmore Dryer Leveling Foot

      Replacing your Kenmore Dryer Leveling Foot play video

      Replacing your Kenmore Dryer Leveling Foot

      Replacing your Kenmore Dryer Leveling Foot play video
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 5 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        dryer had no heat, all other functions worked
        After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly
        • Bryan from west valley city, UT
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          49621, 279769
        18 of 26 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dryer stopping during dry cycle.
        First I pulled the dryer away from the wall and unplugged it. Next I removed the dryer vent hose and threw it away and replaced it with a more rigid metal vent hose. Next, I used a socket wrench to removed the screws holding on the back cover of the dryer. Once the back cover was off it was just a matter of using the socket wrench to removed the bolt holding the sensor in place. After the part was removed I made sure the replacement was orientated in the same way as the original part and then I unplugged the wires from the bad sensor and placed them in the same order on the new part and then I bolted the new sensor back in place. Since the new part has been installed the dryer is working flawlessly and is not turning off mid-cycle like it was. ***Oh, and an important reminder. When you have the back cover pulled off the dryer use a shop vacuum to suck out any dirt and lint in the back of the dryer and make sure you unbolt the metal chute that the dryer lint screen goes into and clean inside the area near the exhaust blower. This is a VERY IMPORTANT part of servicing your dryer and should be done every few months to help avoid the risk of a fire.****
        • James from HARTSELLE, AL
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          WP3392519, 49621
        7 of 12 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        machine would not agitate properly and NOISY Dryer
        took off fabric softener dispenser. used socket to remove agitator. Cleaned and then replaced the little plastic dog ears...works like brand new! It took 15 minutes or less.

        Also repaired noisy dryer. replaced drum rollers, pulley and belt. The job took about an hour and was real simple. However..the dryer was still noisy. Fixed with a prybar to force drum to be tighter. It now sounds like brand new.
        3 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        This dryer still will not heat up.....
        And prior to installing all the parts, Thermal Fuse, Cycling Thermostat, High Limit Thermostat, leveling feet, and I even replace the heating element prior to these parts.
        • Jeannie from Reed City, MI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Socket set
        2 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The Dryer Did Not Work At All
        First removed 8 screws in the back of the dryer to take off the lead 1/4head then removed two blue wires then one screw and you have the thermal fuse . Note: be sure that it is disconected. Before service
        • Raul from channelview, TX
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set
        • Parts Used:
          49621, WP3392519
        2 of 9 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          5 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            5
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS1609293
              Manufacturer Part Number: 49621
              Brand
              Model Number
              Description
              Kenmore
              10686294140
              Dryer
              Kenmore
              10686294340
              Dryer
              Kenmore
              10686294540
              Dryer
              Kenmore
              10686294740
              Dryer
              Kenmore
              10686294840
              Dryer
              Kenmore
              10687884100
              Dryer
              Kenmore
              10687884300
              Dryer
              Kenmore
              10687884600
              Dryer
              Kenmore
              11060012000
              Dryer
              Kenmore
              11060012001
              Dryer
              Kenmore
              11060012002
              Dryer
              Kenmore
              11060022010
              Dryer
              Kenmore
              11060052990
              Dryer
              Kenmore
              11060052991
              Dryer
              Kenmore
              11060056990
              Dryer
              Kenmore
              11060056991
              Dryer
              Kenmore
              11060072990
              Dryer
              Kenmore
              11060072991
              Dryer
              Kenmore
              11060092990
              Dryer
              Kenmore
              11060092991
              Dryer
              Kenmore
              11060094990
              Dryer
              Kenmore
              11060094991
              Dryer
              Kenmore
              11060096990
              Dryer
              Kenmore
              11060096991
              Dryer
              Kenmore
              11060097990
              Dryer
              Kenmore
              1106012510
              Dryer - ELECTRIC DRYER
              Kenmore
              11060172000
              Dryer
              Kenmore
              11060172001
              Dryer
              Kenmore
              11060172002
              Dryer
              Kenmore
              11060182000
              Dryer

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service