Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rodney
February 6, 2019
Dishwasher is not draining.....stopped pumping into the garbage disposal... i took the drain line off garbage disposal and drained water by gravity into shallow pan....what part should i replace to fix the issue?
For model number PDWT380RSS
Hello Rodney, thank you for your question. We would recommend replacing the drain pump. If the water isn't draining at all, and there is no noise when its attempting to drain, the pump should be replaced PartSelect Number: PS2577650. Good luck with your repair!
I installed the new turbidity sensor but the machine keeps turning off mid cycle. When i place an old sensor back but remove the wiring from the sensor, the machine seems to work fine. Does the pathway of insertion of the turbidity sensor matter? there are 4 prongs and a small plastic tab right next to 4 prongs. when i insert the sensor, do the 4 prongs need to be on the top or bottom of the plastic tab?
For model number PDW9980N20SS
Hi Ruben, thank you for your question. No it should not. As long as your are plugging the metal prongs into the right place it is already aligned for you. If you are still having issues with your appliance stopping in the middle of the cycle then you may need to look at your control board being the issue. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
July 4, 2019
My dishwasher works intermittently. I know it’s stopped working because it starts to sporadically beep. Sometimes turning the main breaker off for a few days does the trick but sometimes the dishwasher buttons seem to lock. Wondering if this could be a sensor? Or if it’s kaput.
For model number GLD5604V00WW
Hello Jennifer, thank you for writing. You may want to consider either the Interlock Switch part PS1021382 or the Pump and Motor Assembly part PS8756369 for your model. Are there any error codes being displayed?
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1560822
Manufacturer Part Number: WD21X10272