Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kevin D - December 4, 2018
Verified Purchase
Easy installation
Arrived quickly, but unfortunately wasn't needed, so I cant comment on the quality of the part. and because it was electronic and I had installed it, couldn't be returned.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water and Ice Dispenser power board failure
The symptom was a fried power board located in the freezer door behind the ice/water dispenser. Replacing the board was fairly easy. However, the new board also cooked soon thereafter. I discovered that the root cause for this failure was a failed diode Part Number 5303918287. The diode is located in the wiring near the three water solenoids in the rear (lower right) where the water enters the unit. Unless the diode is also replaced, the board will fail again. Replacement of these components is fairly easy. One trick that work well for me during re-assembly was to use a long wood screw to thread up through the water dispenser panel and into the end of the water tube, and then pull on the screw head to gently feed the tube down into the dispenser.
Other Parts Used:
Paul from Bow, NH
Difficulty Level:
Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
30 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alberto
October 5, 2017
Not getting power to the water and ice dispenser, will this power board be the answer?Thanks
For model number PLHS267ZDB5
Hi Alberto, Thank you for the question, Yes I recommend replacing the Dispenser Power Board to fix the issue you are having. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jesus
July 29, 2019
Pressing the water dispenser also activates the ice dispenser, is this card the cause?
For model number PHSC39EGSS0
Hi Jesus, thank you for your question. It is likely that part that is causing the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Rick
March 22, 2022
The water dispenser activates, light comes but no water coming out. There is water to the bottom of the door at the connector.Any ideas???
For model number PLHS39EESS2
Hi Rick,
Thank you for your question. If your dispenser is not dispensing water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water dispenser actuator, the water inlet valve, the water filter, the dispenser power board, the dispenser control board, the dispenser board ribbon cable, the micro switch and the water tube. We have included a link that you may reference on how to check some of these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
