Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Denis G - June 17, 2023
Verified Purchase
Same as the original
When installing the new part, make sure to take a clear and close picture of where all the wires connect. That way you can remove all the wires from the bad part and reinstall them easily on the new one.
★★★★★
★★★★★
Yvon B - February 28, 2022
Verified Purchase
Work as expected
Fast delivery!
★★★★★
★★★★★
RUOSHEN D - November 6, 2018
Verified Purchase
very useful
very useful
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
September 2, 2019
Hi, my front right burner will start to warm up when the switch is turned on but then the burner shuts down after 10 seconds and doesn't restart. The corresponding hot surface indicator light remains on and will not shut off. Are these the symptoms of a failed infinite switch (wb24t10139)? Thanks, appreciate your help. Brian
For model number PCS968SP2SS
Hello Brian, thank you for inquiring. Yes, this could be due to a faulty Infinite Control Switch, part number PS1517426 for your model. You may also want to consider replacing the Triple Haliant Element itself, part number PS2321560. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Denis
March 10, 2023
Hi, can you confirm part# WB24T10139 is for the 12" 3 sizes burner? I haven't removed it yet but thought the part #21 was smaller in size than the part#24. I just want to make sure before I buy.
For model number JCS968SK4SS
Hello Denis, thank you for your question. Yes, the Switch PS1517426 you had chosen is the Triple switch. This switch is located under the knob furthermost on the right side of the panel. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ryan
25 days ago
Hi, my right front burner starts to warm up. I can see it turn red, then it shuts off after a few seconds. It repeats this process over and over. It gets red and turns off never getting a chance to build up significant heat. If I listen carefully, I can also hear a very faint clicking sound when the right front element turns off. The burner will not stay on consistently like my other burners. Could you help me diagnose what part needs to be changed. Am I looking at a new element radiant 6-9-12 inch (part #PS9864142) or am I looking at a switch infinite control (part #PS1517426)?
For model number PCS968SR1SS
Hi Ryan, thank you for reaching out. Before replacing the radiant element, we would suggest replacing the infinite control switch, part number PS1517426. It turns the surface element on and off and controls how much heat the element produces. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
October 18, 2017
I believe i have a bad switch for the large burner on this stove -part# wb24t10139.The outer burner works but the 2 inners do not. How can i test this switch or can my problem be something else? Thanks.
For model number js750sf2ss (GE stove)
Hi Bob,
Thank you for your question. You can test the switch with a multi meter. You will know if you have no continuity if when testing the prongs on your switch, your meter needle does not move or the numbers on your meter do not change. The problem might be in your burner as well. You can test the burner with your multi meter too. Just to cover all of your bases. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bill
May 24, 2023
Right front triple element works perfectly on inner and outer burner, but the middle element comes on at weaker power. Not sure if it is more likely the infinite control switch or the element. What would you suggest?
For model number ps968sp2ss
Hello Bill, thank you for reaching out. We have concluded that the issue is with the triple element. We recommend you replace the triple element, part number PS2321560, to fix the issue. We hope this sorts out your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1517426
Manufacturer Part Number: WB24T10139