Part Location Diagram of WH43X10034 GE Dual Action Agitator
See part 300 in the diagram
Replacing your General Electric Washer Dual Action Agitator
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dual Action Agitator

 Fits your HSWP1000M4WW!
★★★★★
★★★★★
10 Reviews
$150.31
  Special Order
 Fits your HSWP1000M4WW!
PartSelect Number PS1482519
Manufacturer Part Number WH43X10034
Manufactured by GE
Product Description

Dual Action Agitator Specifications

This does not come with the fabric dispenser - must order separately or use original part.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Dual Action Agitator

Replacing your General Electric Washer Dual Action Agitator
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Marks left on clothes
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH43X10034 replaces these:
AP3965155, 1256897, WH43X10034, WH43X0138, WH43X0142, WH43X10008, WH43X138, WH43X142, WH43X25442
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.4
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 32 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.
I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy.
Other Parts Used:
Agitator Coupling Kit Fabric Softener Dispenser
  • Paul from Carneys Point, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
679 of 726 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The metal shaft of the agitator stripped the plastic coupling inside so I decided to replace the entire agitator assembly.
I installed the coupler and tightened the bolt with an adjustable wrench. Then I aligned the agitator and snapped it onto the coupler. Then I snapped the fabric softener dispenser onto the agitator. All of this took less than 3 minutes and that includes putting the wrench back into the tool box.

I pulled the agitator off of the coupler and out of the machine. I moved the coupler in circles by hand to check to see if it was working properly. It wasn't. I got an adjustable wrench and removerd the bolt that held the coupler on. I pulled the coupler out of the wash basin and examined it. I saw that it was stripped out and I new I had to get a new one. I first called my local sears store to see if I could get the parts. First I spent about 20 minutes tied up in their phone system and then when I finally got to speak to an actual person they didn't have a clue. Then somehow I got transferred to the Sears 1-800- phone number and spent about 20 minutes talking with a parts person. Meanwhile I checked out partsselect.com while I was speaking with the Sears rep. It turns out that Sears wanted about $25 more for the parts than parts select and I was only placing a $50 order. When I brought this to the attention of the sales rep. they replied that they were shipping only GE repair parts. Big Deal. The parts that I got from parts select were the exact parts that I took out of the washer. Ordering online was very easy and convenient and I wasn't overcharged for shipping. The repair took less than 3 minutes and everything works like new. Thank you parts select.
Other Parts Used:
Agitator Coupling Kit Fabric Softener Dispenser
  • Amy from Falling Waters WV, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
95 of 110 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blades broken off agitator
Simply put hands, one under each side of the agitaror and pulled up. The part snapped off very easily. I then placed the new part in the tub and pressed down. Extremely easy, should have done it sooner!
Other Parts Used:
  • Michael from Itasca, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
70 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was floating up off of base during washing
Removed agitator. Removed small bolt holding mounting device. Removed mounting device. Replaced everything in reverse order with new parts. No problems.
Other Parts Used:
Agitator Coupling Kit
  • Rebecca from Lititz, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
62 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator in washing machine not moving
First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.
Other Parts Used:
Agitator Coupling Kit Screw - 1/4-20 MCH HXW 5/8 S
  • Diane from Zebulon, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
40 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator is not moving
We couldnt figure out why our clothes werent getting clean until I took the door magnet off and placed it on the sensor so we could watch the washing machine while it was operating with the lid open. The agitator was not moving at all. I put a rope through the fins of the agitator on 2 sides, and using a board for leverage, it popped right off. I used a socket to remove the coupler screw and put on the new parts. Washer works great now. A very easy repair.
Other Parts Used:
Agitator Coupling Kit
  • Eric from Tulsa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
29 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two paddles on the agitator broke off.
After reading how others have done this and how easy it was, I decided to give it a try. And, sure enough, it was really easy. However, one concern I had was on lifting the old agitator off from the axle using both hands. I didn't want to have the agitator come crashing into my face as I pulled up. So I put a pillow on top of the agitator.
Other Parts Used:
  • Karen from Hamilton, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator Not Working Correctly
Removed by pulling out. Removed coupling air bell with socket and replaced. Wery well. Thnak you.
Other Parts Used:
Agitator Coupling Kit
  • CARL from SPRING, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator kept coming off
Removed the bolt holding the agitator coupler on, replaced it and the bolt then slid the agitator on the coupler and the fabric softener dispenser on top of that.... so easy!!
Other Parts Used:
Fabric Softener Dispenser
  • Jay from Wickliffe, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
8 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace coupling and agitator
unscrewed the old coupling, brushed off yucky build up and replaced, ta da back to washing clothes constantly !
Other Parts Used:
Agitator Coupling Kit
  • Tricia from Glen Allen, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

14 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
October 3, 2019
Does the agitator sit flush with floor of the washer tub
For model number Gtw180ssjoww
PartSelect logo
Hello Pat, thank you for your question. Yes, it should be flat down on the tub. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
November 12, 2021
Is there a different agitator I can put in this unit? I prefer the lower one like a plate agitator.
For model number Wpre6100G2wt
PartSelect logo
Hello Robert, thank you for writing The manufacture has designed each model with either an agitator or no agitator. Your model number comes with part number PS1482519. They are not interchangeable. We hope this information helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
December 30, 2021
HOW DO YOU REMOVE THE AGITATOR
For model number WDRR2500K3WW
PartSelect logo
Hello Dennis, Thank you for the question. We suggest watching the How to Video for this Agitator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Carlos
February 4, 2023
My agitator turn clockwise without stop when I check it manually, I dont know if it should stop half of the way and turn conterclock wise another half turn and stop. It is normal or it is a signal that it needs to plastic dogs changed. May be my model dont need plastic dogs or if it working properlly. Thanks
For model number GTAN 4250 D
PartSelect logo
Hi Carlos, Thank you for your question. The agitator should turn 3/4 of a revolution clockwise and then 3/4 counterclockwise. The upper portion of the agitator is driven by directional cogs or "dogs" that are made of hard plastic and can wear out from hard use. If the upper portion of your agitator will turn in either direction or makes a grating sound during the wash cycle, then the directional cogs may need to be replaced. Visually inspect the cogs for discoloration, wear, or damage. You should also look to see if any cogs are missing. If your cogs have any of the symptoms described above, you will need a set of replacement directional cogs. If you have any questions, please let us know. We look forward to hearing from you!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
September 20, 2019
The agitator fins break and catch and tear cloths. It was replaced eight months ago. Now I can't find the correct replacement mine has a top cap.
For model number HSWP1000M2WW
PartSelect logo
Hello Joe, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1482519. The cap PartSelect Number PS12073992 is sold separate. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Travis
November 8, 2021
Pumps out water but don't spin
PartSelect logo
Hello Travis, thanks for your question. Generally speaking, if your washer won't spin you can begin your repair by inspecting the Coupler, Drive Belt, Clutch and Drive Pulley. For assistance locating the parts to purchase, feel free to call Customer Service with your model number. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Kenneth
December 3, 2021
Can the agitator be removed from the washer?
For model number HSWP1000M4ww
PartSelect logo
Hi Kenneth, Thank you for your question. Yes, the agitator can be removed from the washer. There is a video listed with the agitator on our website that you may reference on how to remove/install it. We hope this helps! If you have any questions, please let us know.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Danny
March 8, 2022
My agitator actually only needs the plastic dogs that make the upper portion work. Couldn't seem to find them in parts list. Are these still available or is the agitator sold as one unit?
For model number WHSR2070V2WB
PartSelect logo
Hello Danny, Thank you for contacting us. We have researched the model you have provided and have found this model does not come equipped with Cogs/Dog Ears. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Beverly
May 24, 2023
Purchased new agitator 9 months ago, not used during winter because at cottage - the fins keep breaking - why? Thanks
For model number HSWP1000M4WWW
PartSelect logo
Hi Beverly, thank you for your question. Based on our research, plastics are highly susceptible to breaking when they become too cold. The agitator fins are made of a thin plastic material, and may not have the strength to bear too cold weather. The compatible agitator for your model is part number PS1482519. If you require assistance to place an order, please contact customer service!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Teresa
July 11, 2023
Is there an agitator without the fins to fit my washer
For model number GTWP1800D1WW
PartSelect logo
Hi Teresa, thank you for reaching out. According to our research, this agitator, part number PS1482519, is the manufacturer recommended replacement agitator for your model. This agitator assembly comes with the fins. We hope this information helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482519
Manufacturer Part Number: WH43X10034
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
General Electric
56241B0WW
Washer
General Electric
56241B1WW
Washer
General Electric
56241B2WW
Washer
General Electric
56241B3WW
Washer
General Electric
56251B0WW
Washer
General Electric
56251B1WW
Washer
General Electric
56251B2WW
Washer
General Electric
56421D0WW
Washer
General Electric
56421D5WW
Washer
General Electric
56421DAWW
Washer
General Electric
57051A0WW
Washer
General Electric
57071A0WW
Washer
General Electric
57081A0WW
Washer
General Electric
57271B0WW
Washer
General Electric
57271B1WW
Washer
General Electric
57271B2WW
Washer
General Electric
57281B0WW
Washer
General Electric
57281B1WW
Washer
General Electric
57281B3WW
Washer
General Electric
57281B5WW
Washer
General Electric
57431D0WW
Washer
General Electric
57431D5WW
Washer
General Electric
57431DAWW
General Electric
57431DCWW
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service