Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dispenser module frame broke, preventing cubed ice and cold water flowing freely.
Remove plastic cover from freezer door by sliding upwards and disconnect wire harness. Disconnect wire harness from refrigerator to module. Unscrew 3 x philips screws securing the module frame in the door. Remove the plastic water tube from the dispenser module. My water tube was perished and leaking, so I replaced it with 6mm diameter automotive vacuum hose and secured it to the water line spigot with a zip-tie. (Note: the module I ordered does not come with a water tube). Re-assembly is the reverse of the above.
Other Parts Used:
Matthew from BELLE ISLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CHARLES
June 12, 2023
OUR ICE DESPENSER IS NOT DESPENSING ICE FROM DOOR DO I NEED # 8 PART?
For model number LSS2312TE0
Hi Charles, thank you for your inquiry. If the ice dispenser is not dispensing ice from the door, the most probable cause of the issue is a faulty auger motor, part number PS10057235, which may need to be replaced. This motor rotates the auger. When the auger rotates, it pushes ice out of the bin through a chute. We hope this solves your problem!
Hello Norm, thank you for asking. According to our research, the water paddle does not come separately. You may need to replace the complete dispenser module, part number PS12728799. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.