Part Location Diagram of W11295990 Whirlpool CNTRL-ELEC
See part 14 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

CNTRL-ELEC

 Fits your JDS1750FS1 Range!
$491.23
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JDS1750FS1 Range!
PartSelect Number PS12704567
Manufacturer Part Number W11295990
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Jenn-Air, Maytag, Whirlpool.
Part# W11295990 replaces these:
W10759274, W11103920, W11254182
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
November 2, 2023
My Jenn Air electric oven will not heat up to desired temp. Can put in the temp to 440 deg but it never goes above 325. Will replacing part W11295990 Cntrl-Elec fix this?
For model number JDS1750FS0
PartSelect logo
Hi Charles, thank you for your inquiry. According to our research, the control board that you mentioned can cause this issue. Before replacing the control board, we would recommend checking the temperature sensor, part number PS11726314, for continuity. If it is faulty, replace it. If replacing the sensor does not fix the issue, replace the control board. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
Bruce
21 days ago
Control panel screen LED display started to fail after a likely broil with door cracked a bit for cook-check. Suspect the heat got to the control mother board. Functions finally ceased. Tried cycling power overnight to attempt reset. No power now to oven light, control functions, though pizo-gas knob starts works fine. Will replacing with part W11295990 be compatible for this model, or is there any other likely culprit to non-functioning control panel?
For model number JDS1750FS0
PartSelect logo
Hi Bruce, thank you for reaching out. Based on the description you have provided, the issue could be with the oven control board, part number PS12704567. It is compatible with your model and it monitors the temperature and controls the oven heat. You may need to replace it to fix the issue. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12704567
Manufacturer Part Number: W11295990
Brand
Model Number
Description
Jenn-Air
JDS1750FB0
Range - SLIDE
Jenn-Air
JDS1750FP0
Range - SLIDE
Jenn-Air
JDS1750FS0
Range - SLIDE
Maytag
JDS1750FS1
Range - Dual Fuel Slide-In Range
Whirlpool
JES1750FB0
Maytag
JES1750FB1
Range
Jenn-Air
JES1750FS0
Range - ELECTRIC SLIDE IN RANGE
Maytag
JES1750FS1
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service