The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Lower Spray Arm
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Not draining
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Debbie-Lee R - October 24, 2019
Verified Purchase
lower spray arm part
The part was in good condition and the repair worked. It can be difficult to find parts and was happy to see you carried the part required. Thank you. Happy customer.
★★★★★
★★★★★
Claire W - June 5, 2021
Verified Purchase
Easy to install perfct fit but BLUE
The part works great my dishes are clean again. I was hoping it would be grey like then original part but it is bright blue.
★★★★★
★★★★★
Gilles L - November 17, 2021
Verified Purchase
Easy to find and fast delivery
Fit as the original except for the color
★★★★★
★★★★★
Kristopher F - May 27, 2019
Verified Purchase
Easy repair.
The part worked great!
★★★★★
★★★★★
John H - June 3, 2022
Verified Purchase
Easy repair
Part came when promised and installation took less than five minutes.
★★★★★
★★★★★
David L - November 19, 2021
Verified Purchase
Easy repair
The part came within two days and was exactly what we needed!
★★★★★
★★★★★
Candice M - March 17, 2021
Verified Purchase
Easy repair
Easy fix
★★★★★
★★★★★
Stephen P - January 9, 2022
Verified Purchase
Eas install
Part came in great shape. Machine washes like it is like brand new.
★★★★★
★★★★★
Elaine P - November 4, 2019
Verified Purchase
Amazing
Quick shipping, amazing service and fast
★★★★★
★★★★★
William K - June 12, 2019
Verified Purchase
No Hassle Repair
I noticed the spray arm on the dishwasher had cracked. I was unsure if replacement was even available. Looked on PartSelect and saw what I thought was the correct part. Not wanting to order the wrong part I sent an email inquiry providing dishwasher model and received confirmation in minutes that the part I had looked at was indeed the correct one. I ordered it and it was delivered in 4 days as indicated. I was also able to track the part through delivery. Amazing Service!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 54 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
spray arm keeps melting
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the thing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
Other Parts Used:
Donna from Madison, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
282 of 299 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My door would not close, so I could not turn on the dishwasher.
It was simple, I do have extended warranty from AHS, but they charge me a trip charge of $55 per repair, and then all parts and labor is covered. But when I checked with Parts Select the parts costed me about $10, so I decided to do it myself.
While I was at it, I also bought other parts and updated my dishwasher with some upgrades.
Good place to buy any parts from, they are very helpful, if you do not know your parts. They even had drawings of my dishwasher, and this actually helped me find what kind of other parts I could buy to upgrade my dishwasher.
Parts select is on my favorites list and pass it on to all my friends.
Spray arm fell over and melted on the heating element.
It required no tools. It took less than one minute to connect the spray arm to the bottom of the unit. Our dishwasher is working perfectly now.
Other Parts Used:
Inge from Hernando, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
83 of 96 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm melted onto the heater
First, I had to remove a small metal paper clip that somehow ended up in the bottom of the dishwasher, which jammed the spray arm. The spray arm wasn't able to spin around, so it melted onto the heater. I removed the spray arm, and replaced it with the new one.
Other Parts Used:
SARAH from MANCHESTER, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
59 of 63 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the old spray arm was removed to clean dishwasher, and not replaced properly, causing it to fall off and against heating element where it melted.
This was right before T'Giving. Ordered the part Wed, and it arrived on Sat morning. I had read the other comments, so thanks to the person who said to make sure you snap the new one in place and check for a snug fit, the replacement was in and working in no time at all.
Other Parts Used:
Travis from Citrus Heights, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
36 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm heat shield melted
Electrolux part number PS1524955, lower spray arm.
Problem. Dishwasher was spraying water out the bottom of the door. The spray arm was damaged when the heat shield overheated, causing the shield to contact the heating element. This resulted in the spray arm melting, causing water to be sprayed out the small gap between the dishwasher door, and the dishwasher bottom pan.
Repair Lower spray arm is easy to remove. Release the arm clips at the center of the spray arm. When the clips are released, lift and remove damaged arm. Replacement arm is attached by pressing down on the center of the spray arm. The new unit has smaller heat shields so it will be less prone to overheating.
Thanks for the fast shipping. Part was recieved in a few days. For just a few dollars, the handwashing is over.
Other Parts Used:
Ashley from Littleton, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
24 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm came off and melted against the heating element
I installed the new spray arm without any tools and it worked perfectly.
Other Parts Used:
Lisa from Fort Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
20 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spary arm and soil trap in my diswasher fell off into the heating element. The pieces melted no longer fitting original area. Ordered the parts at PartSelect and to our amazement, the parts came the next day even though I took 3 - 5 day shipping. We were very happy that we had a new dishwasher
Took no tools. Removed the melted pieces and snapped the new ones in the machine and I was ready to start washing!!! My wife and I are very impressed with prompt and courteous professionalism of PartSelect . I will recommend them highly. I would rate this a 5 star rating, wasn't able to change that star from one to 5
I removed the old spray arm by pulling it off of the base then I pushed the new one on and made sure it was on properly then I pit the base back into the dishwasher and it was good as new!
Other Parts Used:
shannon from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
18 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm support vibrated out, melted lower spray arm.
Grab the tab on the support and rotate 1/4 turn counter-clockwise to unlock it, then lift it off. The lower spray arm simply pops off the support by spreading two tabs underneath.
Align the opening in the lower spray arm support with the outlet post in the bottom and rotate 1/4 turn clockwise to lock.
*Note: direction to remove the filter basket differed from the manual. Visually line up the notches and do not twist too far when locking or you WILL break the retainer tabs.
Simply center the lower spray arm over the support and press down until it locks into place.
Ask our experts a question about this part and we'll get back to you as soon as possible!
56 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
November 26, 2019
I'm looking for a new lower spray arm. I see these numbers on the piece : 1545677 tw asm, 1545678 tw bot, 1545680 pw asm and 1545681 pw bot.Can you help me ?
For model number FFBD2408NS0A
Hello Samuel, thank you for your question. The lower spray arm for this unit is PartSelect Number PS12585623. Please enter the part number into the site for current price and availability. Good luck with your repair!
22 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Brandon
May 27, 2019
Does this lower spray arm fit my dishwasher?
For model number FFBD2406NS0A
Hello Brandon, thank you for inquiring. Yes, this is the replacement for your model.
15 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Sharon
September 17, 2021
Cleaned the filter under the spray arm and cannot get the spray arm to screw in tightly again. Right now it wobbles
For model number Fphd2481kf1
Hello Sharon, thank you for writing. We have a video for you to look at to see if there is something maybe you missed in reattaching the arm. We hope this helps.
11 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Bill
May 29, 2019
What part # is the lower spray arm for this model dishwasher? Thx. Bill
For model number FGBD2434PW5A
Hello Bill, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12585623. Hope this helps!
8 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Betsy
March 6, 2020
Is there an installation instruction online
For model number PS12585623
Good Day Betsy. Thank you for your question in regards to the Dishwasher Lower Spray Arm (PartSelect Number PS12585623). Based on our research, here are the steps to replace the part: 1) Ensure your unit is unplugged or the circuit breakers are off before beginning any repair. 2) Turn off the dishwashers water supply underneath the sink. 3) Open up the dishwasher door. 4) Pull the lower rack out and set it aside. 5) Reach in to remove the lower wash arm (On each side on the bottom of the Spray Arm, there are small locking tabs that can be pushed aside using a flathead screw driver to release it from the unit). 6) Once locking tabs have been released, you can pull it off the dishwasher. 7) Put the new lower wash arm in (simply set it down onto its support and push it down to lock it in place). 8) Ensure it is spinning freely and does not hit the heating element. 9) Put the lower dish rack back in. 10) Close the dishwasher door and you are done. We hope this helps! Best Regards.
7 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Toby
August 29, 2019
The dishwasher isn't cleaning. It pumps, drains and fills with water, but the spray arms aren't spinning. Any ideas?
For model number CDB500NW3A
Hi Toby, if it is affect all the spray arms there is mostly likely an issue with the pump motor part 154844301. Thank you for your question and good luck with your repair!
5 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Carl
September 23, 2019
I need a lower sprayer arm for that model I just do not know what sprayer arm is for that model.
For model number FFBD2407LS0B
Hi Carl,
Thank you for your question. The part number listed under your model number for the lower spray arm is PS1524955. I hope this helps. Thank you and have a great day!
5 peoplefound this helpful.
Was this helpful?
Thank you for voting!
K
November 21, 2019
Hello, is this the right part for the ffbd2406nw6a model? Thanks.
For model number FFBD2406NW6A
Hi K, this is the correct part for your model. Thank you for your question and good luck with your repair!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Valery
August 5, 2019
Will this spray arm be compatible with my dishwasher model # ffbd2407ls1c?
For model number FFBD2407LS1C
Hello Valerie, thank you for your question. Unfortunately, that is not the lower spray arm for your unit. The spray arm for your unit is PartSelect Number: PS1524955. I hope this helps!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Abby
August 16, 2021
Does the bottom arm have to be replaced if it's wobbly and keeps hitting the bottom rack? I took the rack out and it cleans fine so i know it's the bottom arm. I do not see a model number on the part and i'm not sure what number to put otherwise from the stickers inside.
For model number I'm not sure how to find it.
Hi Abby,
Thank you for your question. If the lower spray arm is loose and you are unable to tighten it, then it should be replaced. If you could resubmit your question, with the model number from your dishwasher, we would be happy to help you with this. Here is a link from our website that you may reference on where to locate the model number on your dishwasher, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. If you have any questions, please let us know.
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
