CONSOLE

This was a relatively simple repair to make given that the entire control panel was being replaced.

Prior to any repair, shut off power to the oven at the main breaker panel.

First, in order to reduce the weight of the unit, remove all the oven racks as well as the oven doors. Once all the weight has been removed, there are 4 screws that secure the oven in place (2 on each side). Remove these screws with a Phillips head screwdriver and partially slide the oven out in order to access the 6 screws that hold the control panel in place. remove the 4 screws from the sides of the panel and 2 screws from the back of the panel while carefully supporting the entire control panel (it helps to have another person to support the panel while you remove it). Once removed, unplug the single wire connecting the panel and the ground wire.

To complete the repair, reinstall the new control panel by attaching the ground wire and the single wire connecting the panel. The balance of the repairs are accomplished by reassembling everything in reverse.

Once the control panel has been replaced, turn on the power at the breaker panel and follow the prompts on the new control panel to complete the repair.

This repair took me about 30 minutes to complete start to finish.