Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Installed new inverter
Secured bracket. Attached electrical contact to the compressor. Secured inverter to bracket. Problem: the electrical contact cords are very short, therefore it wa difficult to reach the compressor. Even after connecting to the compressor, the cords are under stress. However, the refrigerator is working fine.
Other Parts Used:
LAVAUGHN from MIAMI, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 21, 2023
After a power outage my Frigidaire refrigerator/freezer does not cool. The compressor/evaporator fan runs but the compressor does not. My multimeter reads continuity across all 3 pins on the compressor. Is the inverter driver the likely malfunctioning part? Thanks
For model number FPBG2277RF2
Hi David, thank you for contacting us. According to our research, the reason behind the compressor not working might be the inverter kit, part number PS12365190. It supplies voltage to the compressor. If the compressor itself shows continuity, the issue might be because of a fault in the externally supplied voltage. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
February 20, 2023
I just had the motherboard replaced, but the unit will not run the compressor.
Could this be the inverter, and is there a way to test it?
For model number FFHB2740PEBA
Hello David, thank you for your question. We have two videos that may help you with your issue. The inverter PS12365190 and Main Board PS11724155 responsible for the compressor. We hope this helps.
The compressor of my Frigidaire refrigerator ffhb2740ps7a does not work.
However the fan runs. I am writing to ask is this part the circuit breaker or the time delay fuse?
Thanks,
Sunny
For model number FFHB2740PS7A
Hello Sunny, thank you for the question. The part you have mentioned is Inverter Board Kit which supplies voltage to the compressor. We would recommend replacing it, the part number is PS12365190. If that does not help, we would suggest checking the Compressor, part number PS2373820. We hope this helps, good luck with this repair!
Fridge has no power, wall and cable check out.. if I unplug the fridge connectors at the power board, unit gets power, freezes but does not cool (no compressor or fan). Any ideas?
For model number ffhb2740psba
Hi Chris, thank you for reaching out. Based on our understanding, it seems that there is an issue with the power control board, part number PS11724155. It activates components such as the compressor and fans to keep the refrigerator cool. You may need to replace it to fix the issue. Glad to be of help!
My evaporator fan went bad. After replacing it neither my compressor nor my compressor fan turn on. When switching service mode I can get each of them to turn on. Would this indicate an inverter board issue?
For model number FGHC2331PFAA
Hi Chris, thank you for the question. Try unplugging your refrigerator for 2 min and plug it back in again. Maybe this might reset the board. You will need to replace the main control board, part number PS10064907, to fix the issue. We hope that helps!
