Dishwasher Electronic Control Board Specifications
This part is the replacement electronic control board for your dishwasher. The control board is found on the control panel, and it monitors the temperature and settings of your dishwasher. If the touchpad will not respond, your dishwasher will not start, or you are having difficulty controlling your dishwasher's settings, you may have an issue with the electronic control board. Be sure to disconnect power from your dishwasher before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Unscrewed top of dishwasher pulled out wires from old control board and hooked up new one screwed dishwasher top back together, working great!
Other Parts Used:
Judith from RIPON, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would no turn on
open door took out 6 screws removed panel unhooked cable removed control box and door latch put back in reverse order
Other Parts Used:
karl from AUGUSTA, WV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
November 9, 2018
The dishwasher will not run. I can't get any of the lights to come on when selected on the touch screen on the "cycles" side but can get all of the lights to come when selected on the "options" side of the touch screen. I had replaced the electrical control panel a year or so ago. Could it be the same thing again?
For model number MDB87749AWB1
Hello Randy, Thank you for the question. The most common issue for this would be a defective Control Board. I also suggest checking the wiring to make sure everything is securely plugged in and not lose or damaged. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Boudreau
November 5, 2019
A got a board control w10255103 rev b. Does the w11202746 replace it?
For model number W10255103
Hello Boudreau, thank you for your question. Yes, the replacement for w10255103 is W11202746. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Zana
October 31, 2022
Buttons light up when pushed, but won't start
For model number MDB7749AWQ1
Hello Zana, thank you for contacting us. We recommend that you check the touchpad & control panel, part number PS11723001, and the electronic control board, PS12349161, to isolate your problem. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
I am having issues with the dishwasher tripping the circuit breaker. I have replaced the heater unit and the motor was replaced about a year ago. I don't see a transient voltage suppressor in the part list, but there is a capacitor.
Is tripping the circuit more likely caused by a faulty capacitor, the control panel or something else?
For model number MDB7749AWB2
Hello Neal, thank you for contacting us. A shorted capacitor, part number PS11753080, has the potential to trip the breaker. Also, please check the door latch assembly, part number PS11754317, the pump assembly, part number PS11703504, and the drain pump, part number PS11753379. When any of these parts is shorted, the dishwasher can trip the breaker. Customer service is available seven days a week if you require assistance placing an order. Thanks again for reaching out!
Clean light flashing 7 times, pulled circuit board to check for discoloration on back by K2 relay & Yellow heat cable plug but all areas look fine. cancel/drain works, but nothing else does. Our Santi dry circuit has not worked for a few weeks now (dishes stay wet when completed) so could both problems be related to a bad heating element? Thank you for response.
For model number DU1345XTVQ4
Hello Bob, thank you for your inquiry. According to our research, clean light flashing 7 times means that the dishwasher is failing to heat the water in an allotted time. We would recommend replacing the heating element, part number PS8260087, to fix these issues. We hope this solves your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12349161
Manufacturer Part Number: W11202746