Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
April 4, 2019
Our white mixer is over thirty years old and recently started making a constant squeal noise when i run it on speeds higher than low. For example, when i turn speed from two to low, the squeal goes away. I don't know what part to change, and my husband's best guess is a bearing. It seems to come from the nose or front area of the machine. I appreciate your help with this problem.
For model number ksm90wh
Hello Lisa, Thank you for the question.I suggest taking the casing apart to check for any parts that might be wore down. There are several gears that can cause the noise as well. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
February 4, 2018
I have a growling noise in the mixer which suggests a dry surface between shaft and bearing. I have eliminated bearings related the motor as being suspect. I believe the problem is in one of the vertical shafts. There is a lot of play in the shaft that extends through the planetary gear. Please recommend what parts need replaced to get the mixer running smoothly.
For model number K45SS
Hi William, Thank you for the question. If the shaft that extends through the Planetary is loose, you will need the Part Number: PS11740538. Hope this helps!
Was this helpful?
Thank you for voting!
Ronald
December 5, 2023
Stripped the nylon gear. Purchased replacement from you. Everything fine until removing the pin in the nylon gear. Pin would not move. I assume it sheared and rotated until the segments do not align. I assume my only recourse is to drive the shaft thru the gear. I see the shaft #11, pin #12 and bracket #9 are available. I do not see any reference to bearings in the bracket #9. I fear I will damage the two bearings. Any suggestions? I have limited tools.
For model number K45SSWH-0
Hello Ronald, thank you for getting in touch. We have attached a relevant video which may not be of the exact same model but will help while removing the bearings. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11775350
Manufacturer Part Number: W11082541