Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Leaking | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher, Washer Dryer Combo.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Jenn-Air.
Part# W11032769 replaces these:
AP6039090, W10304407, W10304408, W10304410, W10409521, W10629971, W10723269, W10901088, WPW10304407, WPW10304408, WPW10304410, WPW10409521, WPW10629971, WPW10723269
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Eric A - May 22, 2023
Verified Purchase
Dishwasher repair from heaven
This replacement dispenser made us realize our original dispenser never worked correctly. We're very happy with the result and will look to Part Select for future appliance parts.
Bernard L - March 10, 2023
Verified Purchase
Fixed my problem
Install was relatively easy. Fixed the leak of rinse fluid in the door. The part took a little longer then usual to arrive.
Martin L - January 14, 2023
Verified Purchase
Rince agent was emptying too fast
The previous part was still working for the detergent, but the rinse agent would empty in a matter of a few days. We even had a "Pro-wash" that ran all night because the water would never completely be clear of foam (too much rinse agent does create foam). The replacement arrived rapidly and it was in perfect condition. The repair was easy and fixed the issue. The only downside is the price, wish there was a less expensive sub-part that could be ordered (e.g. the rubber plug for the rinse agent).
JEAN D - May 5, 2020
Verified Purchase
Quality part just like the original
Replaced the defective part in no time - appliance works just as new
Darryl A - August 1, 2019
Verified Purchase
works like new
very fast shipping ! easy to order!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
January 7, 2019
Dispenser cap came off and burned. Understand have to replace dispenser assembly. What is required to do this? Appears that door needs to be taken apart to fasten from inside.
For model number JDB8700AWS0
Hello Roger, Thank you for the question. Yes, the door will need to come apart to install the dispenser. There are 6 screws on the door and 6 screws on the dispenser. There are 2 tabs that hold the dispenser in place that you have to lift up to remove. Hope this helps, good luck with this repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Ross
September 13, 2021
Is there anyway to purchase just the little detergent door on it's own? That's the only part that's broken on our unit. Thanks
For model number IUD8500BX1
Hello Ross, Thank you for the question. Very sorry, Whirlpool only sells the Door as part of the Dishwasher Detergent Dispenser. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
February 28, 2018
I need a rinse cap only for this jennair dishwasher. Where can it be purchased? Ours was found on bottom of dishwasher and has melted part of it. Thank you
For model number JDB8700AWS1
Hi Tom, Thank you for the question. The rinse aid cap is not sold separate from the dispenser assembly, PartSelect Number PS11773088. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
August 21, 2023
Is the detergent dispenser "cap" available for separate purchase?
For model number KUDC101XSS7
Hello John, thank you for asking. According to our research, the detergent dispenser cap does not come separately. You may need to order the complete detergent dispenser assembly, part number PS11773088. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
March 8, 2022
The latch on the soap dispenser door is broken so the door does not close. Can I just replace the latch or do I need to replace the entire dispenser? And, if need to replace the entire dispenser unit does the door need to come completely apart? Thank you!
For model number MDB8959SBS0
Hello Kathy, Thank you for contacting us. The latch is only sold as part of the dispenser assembly. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11773088. The door will need to come apart to install the dispenser. There are 6 screws on the door and 6 screws on the dispenser. There are 2 tabs that hold the dispenser in place that you have to lift up to remove. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert Bailey
February 6, 2020
My Maytag/Whirlpool dishwasher in the past week has started to goble rinse aid so that i need to fill the dispenser every two to three washes. Will this part fix the issue?Thanks.
For model number MDB8959SBS3
Hi Robert. There is an arrow adjuster inside your dispenser. For most water conditions, the factory setting of 2 will give good results. If you have hard water or notice rings or spots, try a higher setting. Turn the arrow adjuster inside the dispenser by either using your fingers or inserting a flat-blade screwdriver into the center of the arrow and turning. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeanette
December 2, 2021
Do not need anything but Cap. Cap only!
For model number KUDS301XBL7
Hi Jeanette, Thank you for the question. The rinse aid cap is not sold separate from the dispenser assembly, PartSelect Number PS11773088. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Sam
April 27, 2023
I am getting error code 10-1 is this what I need?
For model number Kuds30fxss8
Hi Sam, thank you for reaching out. The error code 10-1 on your appliance indicates you need to test the detergent dispenser, part number PS11773088. We recommend checking its wiring to make sure it's properly connected and working correctly. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Ric
July 8, 2021
Can I buy just the detergent door. The hook that latches the cover door broke and can not latch it shut.
For model number WDT790SAYM3
Hello Ric, Tank you for the question. Checking the model number provided, it shows Whirlpool only makes and sells the Door as part of the Detergent Dispenser. We hope this helps!
Was this helpful?
Thank you for voting!
David
July 15, 2021
My detergent door will not stay latched shut.
For model number KUDC101XWH7
Hello David, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11773088. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11773088
Manufacturer Part Number: W11032769
Manufacturer Part Number: W11032769
Brand
Model Number
Description