![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Upper Spray Arm Specifications
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Upper Spray Arm
![Replacing your Frigidaire Dishwasher Upper Spray Arm Replacing your Frigidaire Dishwasher Upper Spray Arm](https://img.youtube.com/vi/OWFBZZEFB3E/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Not drying dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Crosley, Kenmore, Kelvinator.
Part# 5304506516 replaces these:
AP6036336, 154478201, 154478202, 154607802, 154698901, 154698902, 154754502
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Patrick T - October 18, 2023
Verified Purchase
Easy Repair
The part arrived in about 3 days. Thanks to the video that was done showing how to replace it. It was fairly easy. The challenging part is always disconnecting everything (electrical, ect.) so that you can make the repair.
WADE A - June 9, 2022
Verified Purchase
Exactly what I needed!!!
Part fit perfect and solved the issue of a worn out part.
Katia D - January 8, 2022
Verified Purchase
easy repair
the part was deliver in good condition.shipping time was ok the price was a little bit higher than expected but my diswasher is working great thank you
ANDREA T - November 27, 2021
Verified Purchase
Easy repair went as expected
Part fit and works fine
MARK C - November 26, 2021
Verified Purchase
Great service!
Prompt service. Exactly the part I needed. Thank you.
Joan W - July 17, 2021
Verified Purchase
Easy to install
Thank you for your quick service
Bonnie B - March 10, 2021
Verified Purchase
Easy repair
Hopefully this one will stay on now. The other one kept falling off. Maybe it was worn out - don’t know but so far new one is still on the dishwasher.
Philippe B - January 13, 2021
Verified Purchase
Plug and play
Fast shipping, good quality, plug and play!!!
David D - November 13, 2020
Verified Purchase
Quick delivery despite Covid expectations!
This part was new, as promised, easy to install, and actually came quicker than I had thought it would since Covid seems to be delaying everything! Thanks guys.
Vincent H - October 17, 2020
Verified Purchase
Spray Arm Dishwasher
Part arrived in good condition and it fitted properly. Thanks,
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 81 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The spray arm would fall off during the washing cycle.
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
Other Parts Used:
-
Roy from Worcester, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
817 of 831 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm had been "blowing off" during wash cycle.
-
Mary from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
91 of 108 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper spray arm retainer nut failed
simple repair..woke up one morning and after the dishwasher cycled, I noticed the upper spray arm laying on the top tray.
ordered new one from site, was delivered with-in 2 days ( with standard shipping) all 1 piece, took seriously 5 seconds to unscrew by hand and replace!
ordered new one from site, was delivered with-in 2 days ( with standard shipping) all 1 piece, took seriously 5 seconds to unscrew by hand and replace!
Other Parts Used:
-
Michael from Hillsdale, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
50 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts fall off the Frigidare products in my house.
The parts above fell off or broke and were not covererd under warratee. I called you guys, the parts came in a few days and I snapped them on. Your service was very good.
Other Parts Used:
-
Kurt from Corrales, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
22 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loose spray arm
Unscrewed the old spray arm and replace with the new spray arm.
The best part was in the ordering process. Having the diagrams with the parts let me see that I was ordering the correct part. Thanks!
The best part was in the ordering process. Having the diagrams with the parts let me see that I was ordering the correct part. Thanks!
Other Parts Used:
-
Doris from Arkadelphia, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken upper sprayer
Unscrewed upper sprayer by hand, screwed new one in by hand. Piece of cake!
Other Parts Used:
-
Bob from YONKERS, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
18 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm came off in wash cycle
The spray arm comes off into 3 parts but is really only supposed to be one. I removed the nut from the old assembly and attempted to place the new assembly on by hand. The new nut seemed to be slightly smaller than the original so it would not attach to the dishwasher. Using a kitchen knife, I removed the new nut from the arm unit and attached the new arm to the original nut and it went back on easily. The connection of the new arm to the new nut was 3 tabs that needed to be depressed with the knife and was a different conection method than the assembly that kept coming off in the wash cycle. The replacement part had a much better design than the original.
Other Parts Used:
-
mike from Bartlett, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
17 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper wash arm bushing had worn
Discovered upper wash arm had come off. It looked like it was repairable, but the bushing/clip holding the arm came off after one wash. Looked on line and reviewed part and saw it was a one piece assembly from photos. Removed old assembly by unscrewing from top of washer and screwed new assembly in place.
Other Parts Used:
-
Ronald from Montgomery, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
16 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper arm kept coming off and leaking at bottom of dishwasher
unscrewed the old upper arm spray nut off and rescrewed the new one on....very easy...then I took the old gasket out of the bottom of the door and replaced by sliding it in. very simple....less then 15 minutes for both and have solved my issues.
Other Parts Used:
-
JESSICA from CLARKSVILLE, TN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top spray arm separates from mount
unscrewed old spray arm, installed new arm. Took less than 30 seconds.
Other Parts Used:
-
Richard from Macclenny, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matt
December 25, 2017
Can I order just the replacement "nut" for the upper spray arm? That is the only part I need to replace.
For model number FDB4315LFC0
Hi Matt, Thank you for the question. Very sorry but the nut is only sold as part of the spray arm. Hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Joy
December 18, 2017
Hi, i can’t find part # 1544681. This is the upper arm spray part of my dishwasher. Where can i find this part so that i can replace it? Thank you, joy
Hi Joy,
Thank you for your question. If you are looking for the upper spray arm on your appliance, this would be the correct part. Good luck with your repair.
15 people found this helpful.
Was this helpful?
Thank you for voting!
Kay
November 27, 2017
Bottom sprayer has the circle sprayer, the sprayer is not effective, was not cleaning. I took entire assembly out, including screen. Was a lot of funk down in there. I put assembly back together, dishes came out cleaner, but the assembly was in a pile, i missed something in putting assembly back together, help. Dishes were better but not completely clean, help!!
For model number FGHD2465NF1A
Hi Kay,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the spray arm to see what you are missing. You will find the video under part number PS11770483. If the dishwasher is still not cleaning once you figure out what part is missing, There are some other parts that you will need to check to see which one is causing the issue. You will need to check the upper rack assembly, the the delivery tube gasket, the water inlet valve, the spray arm support, and the water delivery tube grommet. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
July 8, 2019
When trying to install the part for the upper arm spray ,,,the inside part goes up in the machine....so we are unable to screw it in any ideas
For model number gld2445rfbo
Hello Kathy, thank you for writing. We do have an installation video for this replacement on your model. Here is a link: https://www.youtube.com/watch?v=OWFBZZEFB3E. We hope this helps.
![](https://img.youtube.com/vi/OWFBZZEFB3E/maxresdefault.jpg)
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rachel Vance
March 2, 2020
The upper spray arm of my Frigidaire dishwasher has come off twice now. Therefore i am assuming it needs to be replaced with a new one. Is this correct?
Hello Rachel, thank you for your question. Yes, it should be replaced if it keeps coming off. . In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Catrina
January 15, 2019
Will this spray arm work on my old Frigidaire dishwasher, model no. Pld2850rdc2?
For model number PLD2850RDC2
Hi Catrina, thank you for your question. Yes, this part works with that model. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nate
February 8, 2018
I received my replacement arm however i can not get the threads to start. Any advice is welcome. Thanks.
Hi Nate,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the part. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
August 6, 2018
Can this part, ps11770483, be used to replace the bottom sprayer?
For model number fgbd2434pb4a
Hi Susan, Thank you for your question. I have linked the correct lower spray arm for you in a link down below. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Matt
December 25, 2017
Should my dishwasher completely drain when the wash cycle has finished? I notice about a 1/4 of an inch of standing water in the bottom of the tub after each washing cycle.
For model number FDB4315LFC0
Hi Matt, Thank you for the question. Yes, the appliance should drain completely. Sounds like the drain pump, PartSelect Number PS1765174 will need to be replaced. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Tracey
February 4, 2018
Ok,the dispenser door not always opened during the wash the upper rack was not getting clean, so I am thinking the upper arm needs to be replaced.There is not an option to order the middle spray arm. Should i order just the upper arm and see if that takes care of the problem?Thanks
For model number DGBD2432KW1
Hi Tracey, Thank you for the question. If the Dispenser door is not opening, a new spray arm will not fix the issue. There is a wax motor on the back of the dispenser that opens the dispenser door. The motor is not sold on its own so the dispenser will need to be replaced, PartSelect Number PS3655072. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770483
Manufacturer Part Number: 5304506516
Manufacturer Part Number: 5304506516
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)