CNTRL-ELEC
Fits your WFW72HEDW0 Washer!
$483.55
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your WFW72HEDW0 Washer!
PartSelect Number
PS11770328
Manufacturer Part Number
W11031829
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# W11031829 replaces these:
W10661567, W10693596, W10735683, W10909372, WPW10735683
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
December 18, 2018
My Whirlpool duet front load had error code for water level pressure switch changed out now doing the same after 6 loads any ideas?
For model number wfw72hedwo
Hello Kevin, thank you for your question. This error can usually be cleared but it will occur again if the main control board still detects a problem with the signal from the analog pressure sensor. This error code can be caused by a problem with the air pressure tube between the bottom of the washer tub and the analog pressure sensor. If you are able to unplug the washer and check this air pressure tube, you may be able to resolve this problem. . If you find a kink, tear, hose or loose connection in the air pressure tube, then this is the likely cause of your error code. If the air pressure tube appears to be okay, then you will likely need to replace the analog pressure sensor. If the problem still exists after replacing this component, then the main electronic control board for the washer will need to be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joaquin
September 10, 2019
The washer display a F1 error?
For model number WFW72HEDW0
Hi Joaquin,
Thank you for your question. The F1 error code is letting you know that the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn't work, you will need to replace the control board. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dason
November 7, 2023
My washer stopped mid cycle power supply reset, but from the start as now no lights at all to control panel, had to yand door open, as if power outage but power fine, tried unplugging for an hour nothing. Is this part likely the fix. Thank you
For model number WFW72HEDWO
Hello Dason, thank you for contacting us. Based on the description that you have provided, we would recommend checking the control panel assembly, part number PS11757368, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770328
Manufacturer Part Number: W11031829
Manufacturer Part Number: W11031829
Brand
Model Number
Description