Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clay
February 21, 2023
My range bake element blew apart and actually welded itself to the oven bottom. I bought new element (OEM part).
Now my bake and broil elements will not reach desired temp. There are no active fault codes, but when I run it in Automatic test mode, it gives me: 0 FAILURES AND 2 FAULTS ( yet when i scroll to faults it says no faults?)
F2E1 and F1E1
Circuit control board failure? Can only imagine the power surge when the element welded itself!
I have disconnected the power source several times for several minutes and retested. Same results.
Also tested temp sensor 1070 ohms at room temp. and the overheat fuse (has continuity)
Any advice would be much appreciated! $400+ for a new board!
Thanks Clay
For model number WEE745H0FH0 range
Hi Clay,
Thank you for your question. The F2-E1 error code indicates that there is a connection issue between the touchpad and the control board. Check the connections to make sure that they are secure. If they are, press the cancel button and wait 60 seconds. If the code returns, you will need to replace the touch panel. The F1-E1 error code indicates an issue with the electronic control board and the wiring connected to it. To remove the code, turn the circuit breaker off for one minute. Then turn it back on and wait one minute to see if the error code returns. If the code reappears, the issue is with the electronic control board or the wiring attached to it. You will need to check the parts for continuity to see which one is causing the issue. You can do a visual inspection of the board also for signs of damage, wear or burn marks. If you have any questions, please let us know. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
David
June 27, 2023
My oven when preheating on the single rack mode, continues to rise in temperature after reaching the set temp, until it burns the food on the top. When on standard (multi rack) mode, it works properly. Is it the controller?
For model number WEE760H0DE0
Hello David, thank you for the question. The issue is with the electronic control board. We suggest you replace the control board, part number PS11759774. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11759774
Manufacturer Part Number: W10884488
