Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Standoffs were not provided. The current standoffs needed to be remove and placed on the new board. (Not easy)
One the standoffs were removed they needed to be trimmed to attach to the new board. Took longer to do this than remove and replace board.
Other Parts Used:
Ruben from STAR, ID
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russell
January 27, 2020
The display on my Bosch range shows gibberish! All the touch sensitive buttons work, but aliens are trying to communicate through the display. Would this indicate an issue with the control board (12012946) or just the display (00758968)? Thanks!
For model number HGI8054UC
Hello and thank you for writing.
The problem could stem from either one. The easiest way to diagnose which part is faulty is to test the components with the use of a multimeter. We hope this helps. Please contact us anytime if you require further assistance.
After receiving a E310 code I cut power for 30 minutes and E310 code returned. Should I purchase a new control module. Also where is it located? Thanks.
For model number HG18054UC
Hi Joseph, thank you for a very interesting question. The error code e310 indicates the data memory error in the control module. You may need to replace the control panel, part number PS11759845. It is located just behind the front panel. Glad to be of help!
The oven will not light...the glow plug is red...broiler works, top burners work...what can it be? thank you
For model number HG18054UC
Hello Steve, Thank you for the question. The igniter may be weak and still be at fault because it requires a certain amount of current draw to open the valve. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.