Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
September 13, 2019
I set my oven at 350 degrees and it only heat up to 225 degrees. I changed the sensor, but it still does the same thing. Could it be the control panel part number WPW10603098?
For model number WEE730H0DS0
Hi Ray,
Thank you for your question. If you have already replaced the sensor and the oven still will not heat correctly, you will need to check the electronic control board, the oven elements and the wiring between them to see which part is causing the issue. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ramona
September 9, 2021
The only thing that works on the displays panel is the cancel touch button and if i keep my finger on the bake button it says error f2 eo then it says press cancel button to restart but nothing happens
For model number Weg730hdso
Hello Ramona, Thank you for your inquiry. This error code indicates a shorted touch panel/keypad. We would recommend replacing the membrane switch, and if that does not fix the issue, then replace the control board. The black touchpad is part# PS10060052, the white one is PS10060051, and the black and stainless touchpad is PS10060049. Hope this helps.
Had an FE80 error code replaced the fan assembly( part from you) ..same error looked at history of previous error codes and saw a F1E0…assuming I have to replace the control board….am I correct or would appreciate any recommendations you have.
For model number YMES8880DH0
Hi Stan, thank you for your inquiry. The F1E0 error code indicates an issue with the electric control board. If the electric control board appears to have water damage, then it should be replaced. The compatible part number is PS11756686. If you need help placing an order for it, customer service is available 7 days a week and anyone will be happy to assist you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Eric
August 12, 2019
Stove has no display, range and ignitors work
For model number Weg745hofso
Hello Eric, thank you for contacting us. You will want to replace the Membrane Switch part number PS10060049 for your model to fix this. You may also want to consider the Electric Control part number PS11756686. I hope this helps and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lisa
May 16, 2023
F2E1 stuck .. this is what appears on my display .. I did turn off at circuit breaker and that did nothing .. any suggestions??
For model number WEG745H0FSO
Hi Lisa, thank you for getting in touch. The Error F2E1 message appears when there is a poor connection between the touchpad and the oven’s control board. Check the connection between the touchpad and the control board to make sure it is secure. If the issue persists, then you may need to check the electronic control boards, part numbers PS11756686 and PS11759778. If any of these boards are faulty, you may need to replace them. We hope this helps!
I have error code E1F1 - will part PS11756686 correct this?
For model number weg745h0fs0
Hi Sarah, thank you for a very interesting question. Based on our research, the error code E1F1 indicates that there is an internal shortage in the display control board that you have mentioned. We would recommend replacing it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Ryan
November 1, 2021
Will this part fix a non working start button on a whirlpool model WEG745H0FS0 gold Series
R84797305
For model number WEG745H0FS0
Hello Ryan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11756686. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Barry
February 20, 2022
The bake element in the oven doesn't heat up. I have checked power in and this is OK. There is no voltage across the element terminals when bake button pressed even though indication is that it has been confirmed. All top elements work as normal. Suspect control board?
For model number YMES8880DS
Hello Barry, thank you for writing. If no voltage across element terminals then you may need to change out the Bake Element PartSelect Number PS11703285. If not, then you may need to replace the Electronic Control PartSelect Number PS12070440. Good luck with your repair.
My Maytag oven is getting F1E0 error. "Call Service Relay Board" I have recently had it open and did notice what looked like water/sauce damage to the control board. I have recently made other repairs and just want to make sure I am not continuing to spend money on an oven that is going to die. I guess I want to make sure I am ordering the right part for this error.
For model number YMES8880DS0
Hi Peter,
Thank you for your question. The F1 E0 error code indicates an issue with the electronic control board or the wiring connected to it. If the electronic control board appears to have water damage, then it should be replaced. The part number listed under your model number for the electronic control board is PS11756686. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
