Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ramon
May 2, 2019
My freezer is working good refrigerator too warm
For model number 10651799410
Hello Ramon, Thank you for the question. I suggest testing the Bi-Metal Defrost Thermostat, PartSelect Number PS11750673. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ramob
May 2, 2019
I put a new bi metal defrost thermostat my fridge still worm air don't flow in to it
For model number 10651799410
Hello Ramob, Thank you for the question. The next part to check woudl be the Thermistor, PartSelect Number PS11739131. This part is used to detect and helps regulate the temperature in the air inside of your refrigerator. Hope this helps, good luck with this repair!
Hello Ramon, Thank you for contacting us. If you look up the PartSelect Number PS11739131 for the thermister, there is a video on how to install. It will show the location. Hope this helps!
