Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nick C - July 21, 2021
Verified Purchase
Right part-fixed the problem.
No water or ice being dispensed. Water supply was good and pump seemed to be running, suggesting the valve was the culprit and not opening. Swapping out with the new valve was easy and fixed the problem.
★★★★★
★★★★★
Mark P - December 31, 2018
Verified Purchase
The exact replacement
Exactly as ordered, shipped very fast. Fridge pumping out water and ice now just like new,
★★★★★
★★★★★
Robert B - September 6, 2018
Verified Purchase
Worked as expected
OEM part. Good fit, form, and function. Fast shipping
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
crack in inlet valve
took old inlet valve off put new one on hooked up ice maker
Other Parts Used:
Steve from Paola, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench set
41 of 119 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve not working
Followed instructions for testing and replacement on You Tube video.
Other Parts Used:
Theo from Layton, UT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable)
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace variable speed pulley assembly
The housing bracket assembly didn't come close to fitting my lawnmower. I took the pulley and bearings out of the replacement one and put them in my old housing. This got me back to mowing, but it took quite awhile to make the switch.
Other Parts Used:
D J from BOAZ, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Wrench set
2 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water valve
Took the old one off put the new part on. Took 1/2 hour
Other Parts Used:
Tony from ELGIN, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker stopped making ice
Old valve is working, and I can't find out whats wrong. Looks like I will have to replace the icemaker.
Other Parts Used:
Donald from Woodstock, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
37 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
January 10, 2018
Hi, the ice maker in my fridge quit working. I tried the diagnostic test to see if the ice maker was functioning and it seemed to perform other than dispensing water into the ice maker tray. The water dispenser is working just fine. Is this the part i need, or is there one specific to the ice maker that i need to replace? Thanks.
For model number MFI2670XEW6
Hi David,
Thank you for your question. If the ice maker is not making ice and you have tested the ice maker and it is working, then the next part to check would be the water inlet valve. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
September 9, 2019
My water and ice maker work, the problem is the water comes out very slow? I checked all the water lines everything is flowing good no kinks in the lines. ??? thanks jim
For model number GI6FDRXXQ
Hi Jim, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Angelo
September 22, 2017
Ice maker not working. Water in front is. So is there duel water inlet valve or are they on the same one? Because then i can rule that part out. Otherwise, if they are separate, do i look at something else first so i don't have to send it back? Please advise. Thank you.
For model number GI6SARXXF05
Hi Angelo,
Thank you for your question. This part would actually be the water inlet valve specifically for your ice maker. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
January 14, 2020
If you get water out the dispenser but the ice will not work could it still be the be the water valve on the back of the refrigerator
For model number GI 6fdrxxq06
Hi Kenneth, thank you for your question. Yes. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
August 16, 2019
I just replaced the water value kit, it was cracked. Water is working at the dispenser but the ice maker is not making ice.The ice dispenser pad engages the ice auger .
it has been over 72 hours since it was connected.
any suggestions??
For model number WRX735SDBM00
Hi Dave, you will want to check a few things.
1 .Refrigerator connected to a water supply and the supply
shutoff valve turned on? Connect refrigerator to water
supply and turn water shutoff valve fully open.
2. Kink in the water source line? Straighten the water source
line.
3.New installation? Flush and fill the water system. See "Water
and Ice Dispensers in the manual."
4. Is the water pressure at least 35 psi (241 kPa)? The water
pressure to the home determines the flow from the dispenser.
See "Water Supply Requirements in the operators manual."
5. Water filter installed on the refrigerator? Remove filter and
operate dispenser. If water flow increases, the filter may be
clogged or incorrectly installed. Replace filter or reinstall it
correctly.
6. Water dispenser measured fill feature is not dispensing an
accurate amount of water? Calibrate the water dispenser.
See "Water and Ice Dispensers in the operators manual"
7. Refrigerator door closed completely? Close the door firmly.
Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Michelle
January 5, 2018
My refrigerator stopped making ice and shortly thereafter stopped dispensing water. I replaced the water filter and purchased/installed a replacement water inlet valve (w10312696), but still no water. Water feed to refrigerator was tested, as well. Ideas?
For model number GI6FARXXF02
Hi Michelle, Thank you for the question. This sounds like an issues with the Control Board, PartSelect Number PS11750687. You can also check to make sure that the wire harness at the top of the door does not have a loose or broken wire. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
January 28, 2018
On this Whirlpool fridge, where is the water valve located for the ice maker?
For model number GI6SARXXF04
Hello Rich,
Thanks for your question. You will need to take the back cardboard panel off of the fridge. Take the copper tubing off that supplies water to the valve, and you will be able to see the valve.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 6, 2018
My Whirlpool ice maker started dripping water into the ice & froze up so I cut it off. The water dispenser on the door still works fine. Is there a separate water inlet value for ice maker & is that what I need to replace or is there more part involved?
For model number GI6SARXXF01
Hi Michael. Thank you for the question. This sounds like an issue with the Secondary Water Valve, PartSelect Number PS11752594.Remove the shelves inside the appliance and on the back wall there are slots that you need to insert a flat blade screwdriver into and release the tabs for that panel to come off. Once the panel is removed you will have access to the water valve. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
August 2, 2018
My water dispenser works properly but the ice machine does not make ice. The machine makes noise as if its rotating but doesn't seem to be getting water. I looked at the back of the unit and the water inlet valve has one for the supply line and one for the water supply from the house. What are my other options to consider.
For model number WRX735SDHZ
Hello Patrick, Thank you for the question. The valve has two sides (may need to remove the back panel to expose the full valve). One for the ice maker and one for the dispenser. If the ice maker is not getting water, the valve is the first part to check. You can also check to see if the filter needs to be changed. The filters should be changed every 6 months. If the water lines are not damaged or clogged going to the ice maker and everything else checks out good, you may have a defective Ice maker. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
March 12, 2018
How do you separate the water tube fro existing broken valve? The new one seem to have same blue ring with it but no water tube. I pulled on the tube. It does not seem to want to release. Is there a trick? Please advise. Thank you.
For model number Maytag Part W10498990 Water inlet valve
Hello Roger, thank you for your question. The valve is a quick connect type of part, where you depress the blue ring then pull the tube out. If the original (broken) valve has the blue ring, depress the ring and pull the tube out. If it will not release, you can cut the tube at the valve (as close as possible to the blue ring). If this will not leave you with enough slack to install the tube into the new valve, you will need to order another water tube to be installed as well. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11755669
Manufacturer Part Number: WPW10498990
