Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael S - May 14, 2022
Verified Purchase
Fixed!!! My stove is fixed!!
My front left burner would go full nuclear HIGH no matter what temperature I selected on the dial. I ordered this part, was very pleased to see it was an OEM part so I ordered it. It arrived promptly, easy EASY fix. The only difficult part was removing the old one as the spade connecters were on very tight and you have to be careful not to break the plastic on the wire harness when removing. Take your time and go slowly and used some leverage to pry them off. Installation a breeze. Stove works like new again.
★★★★★
★★★★★
Frank S - April 21, 2022
Verified Purchase
Part fit right…
Part was in good shape, came soon after ordering.
★★★★★
★★★★★
Ralph T - April 25, 2020
Verified Purchase
Infintie switch
The part arrived promptly. Switchover was easy. Performed perfectly. Saved me from an annoying and expensive service call.
★★★★★
★★★★★
Paul C - February 18, 2019
Verified Purchase
Straight forward to install and burner is now back in service
Arrived quickly. I struggled to remove the wiring harness from the old switch, had to really pry them apart, but the new one just clicked in place. No one in this region does appliance repair so this saved me having to buy a new range.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
stove top electric burner switch would not regulate intensity of burner.
pulled stove away from wall. took back cover off by removing 10 screws. Identified switch number and ordered replacement switch. pulled knob off front and removed 2 screws from switch and pulled switch out. swapped switch wires and reinstalled switch, back cover and slid stove back into place. Very easy, the whole process took about 1/2 hour.
Other Parts Used:
Arthur from PAWLEYS ISL, SC
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove big burner was not regulating heat properly.
Removed back cover, replaced defective switch, had a little difficulty removing old switch harness. Othan than that a really easy fix.
Other Parts Used:
Kenneth from PETERSBURG, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
November 13, 2017
The triple burner only works on high, and only all 3 come on. Would that be a switch problem or a burner problem ?
For model number MER8775AS0
Hi Craig, Thank you for the question.This sounds like a issue with the switch.Only way to know for sure before replacing the switch is to test the switch and element for continuity with a multi meter. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anne
December 30, 2022
need replace the triple element switch (for front left burner). This seems no longer available (#4 on your diagram). which switch do i need to purchase to replace the triple element switch? thank you
For model number MER8775AS Maytag stove
Hi Anne,
Thank you for your question. The part number listed under your model number for the left-front burner switch is PS11754114. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 2, 2023
Hi,
I am looking for the switches for triple element (front left) and range element (back right-middle. Mine both keep hi, even in low position.
Thanks
For model number YMER8880BS
Hi Michael, thank you for reaching out. The parts you are looking for are part numbers PS11754114, and PS11754410. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
The left side front burner doesn't regulate properly. This is a triple burner and the one switch has 3 positions to regulate each of the burners. Would this be the correct switch?
For model number YMER888oBSO Maytag
Hi Peter,
Thank you for your question. Yes, this would be the correct burner switch for the left-front triple element. We hope this helps!
Was this helpful?
Thank you for voting!
Victoria
January 25, 2024
My front left burner only heats up to hi no matter what temperature I put it on. Would replacing the infinite switch resolve the issue
For model number WFE714HLAS1
Hi Victoria, thank you for getting in touch. Yes, the issue is most probably with the infinite switch, part number PS11754114. It turns the surface element on and off and controls how much heat the element produces. We would recommend replacing it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754114
Manufacturer Part Number: WPW10391743
